SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00502152BTC
Stokta
Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3 1600MHz CL11 1.5V DIMM Dell Optiplex 7010
16 GB DDR3 kit (2 × 8 GB, 1600 MHz, CL11, 1.5 V) validated for Dell Optiplex 7010 MT, DT and SFF
- Capacity16GB (2 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.5V
- 16 GB total capacity from two 8 GB modules
- DDR3 1600 MHz speed rated at PC3 12800
- CL11 latency with 11-11-11 timing at 1.5 V
- 240-pin unbuffered non-ECC DIMM form factor
- Guaranteed compatible with Dell Optiplex 7010 MT, DT and SFF
Dell Optiplex 7010 Memory Upgrade Kit
This 16 GB kit contains two 8 GB DDR3 modules designed specifically for the Dell Optiplex 7010 in MT, DT and SFF chassis. It runs at 1600 MHz with CL11 timings and standard 1.5 V operation. The unbuffered, non-ECC DIMMs install directly into the system's 240-pin slots.
Ideal for restoring or maximising an Optiplex 7010
The kit suits owners who need the full 16 GB capacity supported by this platform or who want a matched pair for dual-channel performance. It is not for systems that require ECC or registered memory, nor for boards limited to lower densities or different DDR generations.
16 GB total capacity in a matched pair
The two 8 GB sticks deliver the maximum memory the Optiplex 7010 can address, ensuring the system recognises every megabyte without configuration issues. This capacity ceiling is the single specification that determines whether the upgrade meets the machine's limit.
Öne çıkanlar
- 16 GB total capacity from two 8 GB modules
- DDR3 1600 MHz speed rated at PC3 12800
- CL11 latency with 11-11-11 timing at 1.5 V
- 240-pin unbuffered non-ECC DIMM form factor
- Guaranteed compatible with Dell Optiplex 7010 MT, DT and SFF
Teknik özellikler
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246412800DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Optiplex 7010 (Mt, Dt, Sff) |
| Package Content | 2 Memory RAM Sticks |
Bu ürünle ilgili sorular
How much power do these 1.5 V DDR3 modules draw when the Optiplex 7010 runs all day?
Each module operates at 1.5 V, the standard voltage for DDR3 1600, so power draw matches typical unbuffered DIMMs of this speed.
What must the Optiplex 7010 already have for this 2 x 8 GB kit to work?
The desktop needs four 240-pin DDR3 slots and a BIOS that supports 16 GB total; the kit fills two slots with 8 GB modules.
Will these CL11 1600 MHz sticks run with slower DDR3 already installed in the 7010?
Yes, the motherboard will clock all modules to the lowest common speed and latency, so older DDR3 stays compatible.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
