SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00501394BTC
Stokta
Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3 1600MHz CL11 1.5V Non-ECC DIMM memory upgrade
16 GB DDR3 kit with two 8 GB modules at 1600 MHz CL11 for Intel Db65Al, Db75En, Dh67Bl, Dh61Be and Dh67Cf boards
- Capacity16GB (2 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.5V
- 16 GB total capacity from two 8 GB modules
- 1600 MHz DDR3 speed rated at PC3 12800
- CL11 latency with 11-11-11 timing for responsive performance
- 5 V standard voltage fits Intel Db65Al, Db75En, Dh67Bl, Dh61Be, Dh67Cf boards
- Unbuffered non-ECC 240-pin DIMM kit backed by lifetime warranty
Targeted 16 GB DDR3 upgrade for Intel desktop boards
This kit delivers 16 GB of DDR3 memory in two matched 8 GB modules rated at 1600 MHz with CL11 timings and 1.5 V operation. It is built specifically for the Intel Db65Al, Db75En, Dh67Bl, Dh61Be and Dh67Cf mainboards listed by the supplier. The unbuffered non‑ECC DIMMs suit standard desktop workloads on those platforms.
DDR3 1600 bandwidth and density ceiling
The DDR3 1600 (PC3 12800) interface caps peak transfer rate at the rated speed, so bandwidth cannot exceed that level. Each board accepts up to 32 GB total across four slots, making this 16 GB kit a half‑capacity step; adding a second identical kit would reach the platform maximum. No higher DDR3 speeds or larger single modules are supported by these chipsets.
Straightforward two‑module installation
Installation requires seating both 240‑pin DIMMs into the correct paired slots for dual‑channel operation; the boards have four slots, so slot order matters. Common issues include mixing these modules with older sticks of different speed or voltage, which forces the system to down‑clock or fail POST. Using the matched pair avoids timing mismatches and ensures stable operation.
Öne çıkanlar
- 16 GB total capacity from two 8 GB modules
- 1600 MHz DDR3 speed rated at PC3 12800
- CL11 latency with 11-11-11 timing for responsive performance
- 5 V standard voltage fits Intel Db65Al, Db75En, Dh67Bl, Dh61Be, Dh67Cf boards
- Unbuffered non-ECC 240-pin DIMM kit backed by lifetime warranty
Teknik özellikler
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246412800DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Intel Db65Al, Db75En, Dh67Bl, Dh61Be, Dh67Cf |
| Package Content | 2 Memory RAM Sticks |
Bu ürünle ilgili sorular
Should I choose the 16 GB kit or add a second kit to reach the 32 GB maximum?
The board supports up to 32 GB across four slots, so this 16 GB kit fills half the capacity; add a second identical kit only if your workload needs more than 16 GB.
What does the 1600 MHz rating deliver in my Intel Db65Al system?
The modules run at DDR3 1600 (PC3 12800) with CL11 timing, giving the rated bandwidth the platform’s memory controller supports.
Does the 240 pin DDR3 interface limit speed or capacity on these boards?
The 240 pin DDR3 slots accept this 1600 MHz kit natively; the chipset caps total memory at 32 GB across four sockets.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
