SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00501587BTC
Stokta
Computer Memory Solutions
Computer Memory Solutions 32GB (4x8GB) DDR3 1333 ECC Registered DIMM memory upgrade
32 GB DDR3 ECC registered DIMM kit for Supermicro H8DGU and H8QG6 server motherboards
- Capacity32GB (4 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 32 GB capacity across four 8 GB modules for high-density server memory
- DDR3 1333 MHz PC3-10600 speed with CL9 latency for responsive performance
- ECC registered DIMM design detects and corrects data errors for reliability
- Validated compatibility with Supermicro H8DGU H8QG6 H8QG7 server platforms
- 5 V operation and 240-pin form factor match standard DDR3 server slots
32GB DDR3 1333 ECC Registered Kit
This 32GB kit contains four 8GB DDR3 1333 ECC Registered DIMMs built for Supermicro H8DGU-LN4F+, H8QG6+-F, H8QG6-F and H8QG7+-LN4F servers. The modules run at 1.5V with CL9 9-9-9 timings and use a 2Rx4 organization. Computer Memory Solutions validates compatibility for the listed systems.
Suits Supermicro server upgrades only
Buyers maintaining or expanding the named Supermicro platforms can install this matched quad-channel set with guaranteed compatibility. The registered ECC design targets multi-socket server boards that require buffered modules. Builders using consumer motherboards, laptops or non-listed server models should look elsewhere because the registered signal and pin-out will not work.
Registered ECC DDR3 1333 with 2Rx4 layout
The registered ECC DDR3 1333 specification combined with a 2Rx4 rank configuration is the single detail that decides fit. Only systems designed for PC3-10600 registered DIMMs will accept these modules; unbuffered or consumer boards will not post. Verify the motherboard manual calls for registered ECC before ordering.
Öne çıkanlar
- 32 GB capacity across four 8 GB modules for high-density server memory
- DDR3 1333 MHz PC3-10600 speed with CL9 latency for responsive performance
- ECC registered DIMM design detects and corrects data errors for reliability
- Validated compatibility with Supermicro H8DGU H8QG6 H8QG7 server platforms
- 5 V operation and 240-pin form factor match standard DDR3 server slots
Teknik özellikler
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10247210600ECCR2R4H |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Supermicro H8DGU-LN4F+ H8QG6+-F H8QG6-F H8QG7+-LN4F SERVER |
| Package Content | 4 Memory RAM Sticks |
Bu ürünle ilgili sorular
How much heat and power does the 1.5 V DDR3 1333 kit draw when the server runs continuously?
Each 8 GB module operates at 1.5 V and DDR3 1333 speed; registered ECC buffering adds slight overhead, but total draw stays within standard DDR3 thermal limits for 24/7 server loads.
What motherboard slots and CPU configuration are required to install these four 240-pin registered DIMMs?
The kit needs a Supermicro H8DGU-LN4F+, H8QG6+-F, H8QG6-F or H8QG7+-LN4F board with 240-pin DDR3 slots; the platform supports up to eight sockets per CPU and 32 sockets with four CPUs for full 1 TB registered ECC capacity.
Can I mix these CL9 2Rx4 registered modules with older unbuffered ECC UDIMMs already in the system?
No — registered and unbuffered ECC types cannot be mixed on the same motherboard; all slots must use registered DIMMs like this 4 x 8 GB kit for stable operation.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
