SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00501099BTC
Stokta
Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR3 1600MHz CL11 DIMM memory upgrade for Dell Optiplex 9020 MT/SFF/USFF
8GB dual-channel DDR3 kit (2×4GB, 1600MHz, CL11, 1.5V) validated for Dell Optiplex 9020 MT, SFF and USFF
- Capacity8GB (2 x 4GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.5V
- 8GB dual-channel kit boosts multitasking headroom on Dell OptiPlex 9020
- DDR3-1600 CL11 timing delivers responsive everyday performance
- 5V unbuffered non-ECC DIMMs install without BIOS changes
- 240-pin form factor fits MT, SFF and USFF chassis
- Lifetime warranty from CMS backs long-term reliability
System-specific DDR3 kit for Dell Optiplex 9020
This 8 GB kit contains two 4 GB DIMMs rated at 1600 MHz with CL11 timings and 1.5 V operation. The modules are unbuffered, non-ECC and built on a 240-pin DDR3 interface. Computer Memory Solutions validates compatibility for the Optiplex 9020 MT, SFF and USFF form factors.
Suits owners restoring
The kit matches the factory specification for these desktops and fills two of the four available slots. Buyers needing more than 32 GB total capacity or registered ECC modules should look elsewhere. Systems that require a different pin count, voltage or DDR generation will not accept these sticks.
The 240-pin DDR3 1600 MHz CL11 specification
Only motherboards designed for unbuffered non-ECC DDR3 at 1.5 V can use this memory. The 1Rx8 rank organisation and 11-11-11 timing are fixed by the module design. Verify the target system uses 240-pin DDR3 slots before ordering.
Öne çıkanlar
- 8GB dual-channel kit boosts multitasking headroom on Dell OptiPlex 9020
- DDR3-1600 CL11 timing delivers responsive everyday performance
- 5V unbuffered non-ECC DIMMs install without BIOS changes
- 240-pin form factor fits MT, SFF and USFF chassis
- Lifetime warranty from CMS backs long-term reliability
Teknik özellikler
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126412800DIMM |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Optiplex 9020 Mt/Sff/Usff |
| Package Content | 2 Memory RAM Sticks |
Bu ürünle ilgili sorular
My Optiplex 9020 has four DIMM slots — will this 2 x 4 GB kit leave room to reach the 32 GB maximum?
Yes, the kit occupies two of the four slots so you can add two more modules later to reach the 32 GB limit.
The modules are specified as 1.5 V unbuffered non-ECC — does that match the Optiplex 9020 MT/SFF/USFF memory requirements?
The kit is built to the 1.5 V unbuffered non-ECC DIMM standard that the Optiplex 9020 MT/SFF/USFF uses.
After installing both sticks, how can I confirm the system sees the full 8 GB at 1600 MHz CL11?
Check the BIOS memory information or the operating-system task manager; they should report 8 GB total running at 1600 MHz with CL11 timings.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
