SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00501696BTC
Stokta
Computer Memory Solutions
Computer Memory Solutions CM2048722133ECCREG 64GB 4x16GB DDR4 2133 ECC Reg
Four 16 GB DDR4 registered ECC DIMMs at 2133 MHz CL15 for Dell PowerEdge T430 servers
- Capacity64GB (16 x 4GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Timing15-15-15
- Voltage1.2V
- 64 GB total capacity for large server workloads
- ECC registered DIMMs protect data integrity in Dell PowerEdge T430
- DDR4 2133 MHz speed matches system specifications
- CL15 latency at 1.2 V for efficient operation
- 288-pin 2Rx4 modules install in matched quad-channel sets
Targeted Server Upgrade
This 64 GB kit delivers four 16 GB DDR4 2133 MHz registered ECC DIMMs built for the Dell PowerEdge T430. Each module runs at CL15 1.2 V with a 2Rx4 organisation and 288-pin form factor. The memory is validated for the system's registered ECC requirement and ships as a matched set of four sticks.
Capacity Step and Compatibility Rules
The kit raises a T430 from smaller configurations toward the 192 GB registered ECC ceiling, or 384 GB when 32 GB modules are used. The platform provides eight sockets for the first CPU and four for the second; mixing registered and unbuffered ECC is not supported. Four-gigabyte registered modules exist in both x4 and x8 variants, which must not share a memory bank.
Platform Limits and Practical Constraints
The T430 architecture caps registered ECC capacity at 192 GB with current 16 GB DIMMs and requires identical modules within each bank. Population rules restrict upgrades to the socket counts defined for each processor, so a second CPU is needed to access the full eight-plus-four layout. DDR4 2133 sets the speed ceiling for this generation.
Öne çıkanlar
- 64 GB total capacity for large server workloads
- ECC registered DIMMs protect data integrity in Dell PowerEdge T430
- DDR4 2133 MHz speed matches system specifications
- CL15 latency at 1.2 V for efficient operation
- 288-pin 2Rx4 modules install in matched quad-channel sets
Teknik özellikler
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2048722133ECCREG |
| Capacity | 64GB (16 x 4GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Timing | 15-15-15 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Dell Poweredge T430 |
| Package Content | 4 Memory RAM Sticks |
Bu ürünle ilgili sorular
Does the 288-pin DDR4 form factor fit the Dell PowerEdge T430 memory slots?
Yes, the 288-pin DDR4 registered DIMMs are the correct physical format for the PowerEdge T430's memory sockets.
What is the correct installation sequence for the four 16 GB modules across the eight CPU 1 sockets?
Populate identical 2Rx4 modules within each memory bank; do not mix the x4 and x8 4 GB variants in the same bank.
When should the registered ECC modules be replaced if correctable error counts start rising?
Replace modules when the system logs show increasing correctable ECC errors, indicating cell degradation.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
