Computer Memory Solutions
Computer Memory Solutions CM5126412800SODRH 8GB (2x4GB) DDR3 1600MHz memory upgrade
Two 4 GB DDR3 SO-DIMM modules at 1600 MHz for Sony Vaio VPCEE25FB, VPCEE25FX, VPCEE26FX and VPCEE26FL
- Capacity8GB (2 x 4GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.5V
- 8 GB total capacity from two matched 4 GB modules
- DDR3 1600 MHz speed rated at PC3 12800 bandwidth
- CL11 latency with 11-11-11 timing for responsive operation
- 204-pin unbuffered non-ECC SO-DIMM fits listed Sony Vaio models
- 5 V standard voltage ensures broad DDR3 laptop compatibility
Sony Vaio Vpcee Series Compatibility
This 8 GB kit contains two 4 GB DDR3 SO-DIMM modules built for the Sony Vaio Vpcee25Fb, Vpcee25Fx, Vpcee26Fx and Vpcee26Fl notebooks. It targets owners of those models who need to reach the platform maximum of 8 GB. Buyers with other laptops or desktop systems cannot use this memory.
Kit Configuration and Voltage
The pair of unbuffered, non-ECC sticks installs directly into the two available slots, delivering the full 8 GB capacity in a matched set. Each module operates at the standard 1.5 V DDR3 voltage, while the platform also supports 1.35 V low-voltage operation. No heat spreaders or additional software are included in the package.
DDR3 1600 CL11 Specification
The memory runs at 1600 MHz (PC3-12800) with CAS latency 11 and 11-11-11 timings on a 204-pin interface. This speed and latency combination determines whether the upgrade will function correctly in the listed Vaio models. Systems requiring a different DDR generation, higher frequency or lower latency will not be compatible.
Öne çıkanlar
- 8 GB total capacity from two matched 4 GB modules
- DDR3 1600 MHz speed rated at PC3 12800 bandwidth
- CL11 latency with 11-11-11 timing for responsive operation
- 204-pin unbuffered non-ECC SO-DIMM fits listed Sony Vaio models
- 5 V standard voltage ensures broad DDR3 laptop compatibility
Teknik özellikler
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126412800SODRH |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Sony Vaio Vpcee25Fb, Vpcee25Fx, Vpcee26Fx, Vpcee26Fl |
| Package Content | 2 Memory RAM Sticks |
Bu ürünle ilgili sorular
Will the 2Rx8 rank configuration ever require replacement if the Sony Vaio motherboard only accepts single-rank modules?
The kit uses 2Rx8 dual-rank chips; if the specific Vaio model requires single-rank memory the modules may not be recognised and would need to be swapped for single-rank equivalents.
What speed ceiling appears first when the CL11 1600 MHz modules run continuously in a Vaio limited to DDR3-1066?
The laptop's memory controller caps operation at 1066 MHz, so the 1600 MHz sticks will downclock to that lower frequency as soon as sustained workloads begin.
How much heat and power do the 1.5 V unbuffered SO-DIMMs generate during all-day use?
At the rated 1.5 V the pair draws standard DDR3 SO-DIMM power and produces modest heat; no heat spreader is fitted, so airflow in the Vaio chassis handles cooling.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.



