Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap

Corsair

Corsair Vengeance RGB CMH64GX5M2B5600C40 64GB (2 x 32GB) DDR5 5600 CL40 desktop RAM

SKU CH-6FXE-KCGGZ MPN CMH64GX5M2B5600C40

Dual-channel 64 GB DDR5 kit at 5600 MT/s with CL40 timing, 1.25 V operation, ten-zone RGB lighting and Intel XMP 3.0 profiles

  • Capacity64GB (2 x 32GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL40
  • Timing40-40-40-77
  • Voltage1.25V
  • 64 GB capacity with two 32 GB modules for heavy multitasking
  • DDR5 5600 speed delivers high bandwidth for demanding workloads
  • CL40 latency and 40-40-40-77 timings give tight response times
  • Intel XMP 3.0 profile enables one-click overclocking on 600 and 700 series
  • Ten-zone RGB lighting with iCUE control adds customisable illumination

64GB Dual-Channel DDR5 Kit

This Corsair Vengeance RGB kit delivers 64GB of DDR5 memory across two 32GB modules. It is built for desktop systems that use 288-pin DIMM slots. The memory operates at 5600 MT/s with a CAS latency of CL40.

Suits Intel 600 and 700 Series Builds

The kit is validated for Intel 600 and 700 series platforms and uses Intel XMP 3.0 profiles for simple configuration. It runs at 1.25V. Builders on other chipsets or those needing lower latency timings should verify compatibility before purchase.

5600 MT/s Speed Decides Fit

The single specification that determines suitability is the 5600 MT/s data rate. Your motherboard and CPU must support this DDR5 speed to gain the rated bandwidth; otherwise the modules will downclock to the highest mutually supported frequency.

Öne çıkanlar

  • 64 GB capacity with two 32 GB modules for heavy multitasking
  • DDR5 5600 speed delivers high bandwidth for demanding workloads
  • CL40 latency and 40-40-40-77 timings give tight response times
  • Intel XMP 3.0 profile enables one-click overclocking on 600 and 700 series
  • Ten-zone RGB lighting with iCUE control adds customisable illumination

Teknik özellikler

BrandCORSAIR
SeriesVengeance RGB
ModelCMH64GX5M2B5600C40
Part NumberCMH64GX5M2B5600C40
Capacity64GB (2 x 32GB)
Type288-Pin PC RAM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL40
Timing40-40-40-77
Voltage1.25V
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack
Heat SpreaderYes
FeaturesWelcome to the Cutting-Edge of Performance: Push the limits of your system like never before with CORSAIR DDR5 memory, unlocking even faster frequencies, greater capacities, and higher CPU processing.
Dynamic Ten-Zone RGB Lighting: Illuminate your system with ten individually addressable, ultra-bright RGB LEDs per module, encased in a panoramic light bar for vivid RGB lighting from any viewing angle.
Create and Customize: Choose from dozens of preset lighting profiles, or create your own in iCUE.
Custom Intel XMP 3.0 Profiles: Customize and save your own XMP profiles via iCUE to tail
Recommend UseIntel 600 and 700 series
LED ColorRGB
Kargo ağırlığı0.14 kg
Koli boyutu164 × 133 × 13 mm

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Will the 288-pin DDR5 modules with heat spreaders clear my CPU cooler?

Each module is a standard 288-pin DDR5 DIMM with an integrated black heat spreader; verify your cooler's published RAM clearance height against the module height before purchase.

How do I enable the rated 5600 speed and CL40-40-40-77 timings on my Intel 600 or 700 series board?

Enter the BIOS, locate the Intel XMP 3.0 profile for this kit, select Profile 1, save and reboot; the common mistake is leaving the board on Auto so it trains at a lower JEDEC speed.

What upkeep does the ten-zone RGB lighting and heat spreader need over time?

Dust the light bar and heat spreader fins with compressed air every few months; the LEDs are sealed and non-replaceable, and the modules have no user-serviceable parts.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.