BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.0027877BTC
Stokta
Corsair
Corsair Vengeance RGB Pro 16GB (2×8GB) DDR4 3600 CL18 White desktop RAM CMW16GX4M2C3600C18W
16GB dual-channel DDR4 3600 CL18 kit with white anodized aluminum heat spreaders and 10 ultra-bright RGB LEDs per module controlled via iCUE software
- Capacity16GB (2 x 8GB)
- Type288-Pin PC RAM
- SpeedDDR4 3600 (PC4 28800)
- CAS LatencyCL18
- Timing18-19-19-39
- Voltage1.35V
- Dynamic multi-zone RGB with 10 ultra-bright LEDs per module
- iCUE software synchronises lighting across Corsair RGB components
- Custom performance PCB delivers high signal quality and stability
- Tightly screened ICs provide extended overclocking potential
- XMP 2.0 enables optimal performance with a single BIOS setting
Dual-Channel DDR4 3600 Kit
This 16GB kit contains two 8GB DDR4 modules rated at 3600 MT/s with CL18 timings of 18-19-19-39. Each module features an anodized aluminium heat spreader in white and ten addressable RGB LEDs. The kit operates at 1.35V and supports Intel XMP 2.0 for automatic configuration on compatible motherboards.
For RGB builders on DDR4 platforms
The dual-channel layout suits mainstream desktops that run Intel or AMD DDR4 motherboards and want synchronised lighting through iCUE software. Systems that require ECC, registered DIMMs, or a different voltage should look at other memory types.
3600 MT/s CL18 speed grade
The rated frequency and latency define the out-of-the-box performance ceiling when XMP 2.0 is enabled. If the platform cannot run DDR4 at this data rate or the builder needs tighter timings, a different speed bin is required.
Öne çıkanlar
- Dynamic multi-zone RGB with 10 ultra-bright LEDs per module
- iCUE software synchronises lighting across Corsair RGB components
- Custom performance PCB delivers high signal quality and stability
- Tightly screened ICs provide extended overclocking potential
- XMP 2.0 enables optimal performance with a single BIOS setting
Teknik özellikler
| Brand | CORSAIR |
|---|---|
| Series | Vengeance RGB Pro |
| Model | CMW16GX4M2C3600C18W |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL18 |
| Timing | 18-19-19-39 |
| Voltage | 1.35V |
| ECC | No |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | White |
| Heat Spreader | Anodized Aluminum |
| Features | Dynamic Multi-Zone RGB Lighting 10 Ultra-bright RGB LEDs per module. Next Generation Software Take control in CORSAIR iCUE software and synchronize lighting with other CORSAIR RGB products, including CPU coolers, keyboards and fans. Custom Performance PCB Provides the highest signal quality for the greatest level of performance and stability. Tightly Screened Memory Carefully screened ICs for extended overclocking potential. Maximum Bandwidth and Tight Response Times Optimized for peak performance on the latest Intel and AMD DDR4 motherboards. No Wires Required Requires no extra wire |
| LED Color | RGB |
| Kargo ağırlığı | 0.16 kg |
| Koli boyutu | 163 × 132 × 10 mm |
Bu ürünle ilgili sorular
Does the 16GB (2 x 8GB) kit include any cables or controllers for the 10 RGB LEDs per module?
No extra wires or cables are required; the 10 ultra-bright RGB LEDs per module draw power and control signals directly through the 288-pin DDR4 slots.
Should I choose this CL18 3600 kit or look for a lower-latency version for my DDR4 build?
This kit runs at DDR4 3600 with timings of 18-19-19-39 at 1.35 V; select it when your motherboard supports XMP 2.0 and you want the rated speed without manual tuning.
What does the PC4 28800 rating mean once the modules are installed and XMP 2.0 is enabled?
It indicates a peak transfer rate of 28800 MT/s at DDR4 3600, delivering the advertised bandwidth and tight response times on compatible Intel and AMD platforms.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
