DELL
DELL HUH721010AL4200 10TB 7.2K 12G 3.5" 4Kn SAS internal hard drive
A 10TB 3.5-inch SAS drive spinning at 7200RPM with a 256MB cache and 12Gbps interface
- 10 TB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive throughput
- 12 Gbps SAS interface moves data quickly
- 256 MB cache buffers burst workloads
- 5 inch 4Kn form factor fits standard bays
10TB SAS drive for PowerEdge Gen13 servers
This 3.5" internal hard drive delivers 10TB of storage on a 12Gbps SAS interface using 4Kn sector formatting. It spins at 7200RPM and includes a 256MB cache buffer for sustained throughput. The drive is built for Dell PowerEdge Gen13 server environments requiring high-capacity nearline storage.
Factory packaging includes drive only
The supplier ships the bare drive without mounting rails, cables or management software. Installation into a compatible PowerEdge chassis requires the correct hot-plug carrier or caddy, which must be sourced separately. No firmware utilities or diagnostic media are bundled in the box.
Standard 3.5" SAS installation applies
The drive fits a 3.5" SAS backplane and draws power through the standard connector; no additional adapters are needed. Common issues arise when the server backplane or controller does not support 4Kn sector format, preventing the drive from being recognised. Verify controller firmware and backplane compatibility before deployment.
Öne çıkanlar
- 10 TB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive throughput
- 12 Gbps SAS interface moves data quickly
- 256 MB cache buffers burst workloads
- 5 inch 4Kn form factor fits standard bays
Teknik özellikler
Bu ürün için henüz yayınlanmış teknik özellik yok.
Bu ürünle ilgili sorular
Will the 256MB cache need any firmware updates or replacement over time?
The 256MB cache is built into the drive controller and does not require separate maintenance or replacement.
Does the 12Gbps SAS interface or the 7200RPM spindle hit its throughput ceiling first during sustained writes?
The 7200RPM spindle typically limits sustained sequential throughput before the 12Gbps SAS link saturates.
How much heat and power does the 3.5" 10TB drive produce when running continuously in a server chassis?
The 3.5" 10TB SAS drive draws typical enterprise 7200RPM power levels and requires standard server airflow for cooling.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
