FANXIANG
FANXIANG S880E 500GB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
$67,99
0.00087595BTC
Stokta
FANXIANG
FANXIANG S880E 1TB PCIe 4.0 NVMe internal SSD
M.2 2280 1TB NVMe SSD with PCIe 4.0 x4 reaching 7300MB/s read and 6800MB/s write, single-sided for PS5 and laptops
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
Options 1TB
- 1TB
- 500GB
- Up to 7300 MB/s read speed for faster game loads
- Up to 6800 MB/s write speed for quick file transfers
- PCIe 4.0 x4 interface with NVMe 2.0 support
- 600 TBW endurance and 2,000,000 hours MTBF for long life
- Single-sided M.2 2280 design fits PS5, laptops and desktops
Capacity and interface
The FANXIANG S880E is a 1TB M.2 2280 internal SSD that uses a PCI-Express 4.0 x4 interface with NVMe 2.0 support. It targets PC builders and PS5 owners who want faster load times and file transfers in a single-sided design that fits thin laptops and compact desktops.
Sustained workload behaviour
Sequential reads reach up to 7300MBps and writes up to 6800MBps, with a 600TBW endurance rating and 2,000,000 hours MTBF. The 3D NAND flash and controller maintain those speeds across large transfers and heavy application workloads without throttling to lower tiers.
Thermal and power profile
A graphite-coated copper foil layer plus an aluminium foil layer on the label side dissipates heat in the 0°C to 70°C operating range. The drive stays within thermal limits during typical gaming and productivity sessions while drawing only the power required by the PCIe 4.0 x4 link.
Öne çıkanlar
- Up to 7300 MB/s read speed for faster game loads
- Up to 6800 MB/s write speed for quick file transfers
- PCIe 4.0 x4 interface with NVMe 2.0 support
- 600 TBW endurance and 2,000,000 hours MTBF for long life
- Single-sided M.2 2280 design fits PS5, laptops and desktops
Teknik özellikler
| Brand | FANXIANG |
|---|---|
| Model | S880E |
| Part Number | S880E-1TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7300MBps |
| Max Sequential Write | Up to 6800MBps |
| Terabytes Written (TBW) | 600TBW |
| MTBF | 2,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 3.20mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 8g |
| Manufacturer Recertified | Yes |
Bu modelin diğer sürümleri
Aynı seriden 1 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
Bu ürünle ilgili sorular
Does the S880E run hot without a heatsink during all-day use?
The drive operates from 0°C to 70°C and uses a graphite-coated copper foil plus aluminium foil layer for thermal control.
What slot and protocol does my motherboard need for this M.2 2280 drive?
An M.2 2280 slot wired for PCIe 4.0 x4 with NVMe support is required.
Will the 3.20 mm height fit alongside older low-profile components?
The single-sided design keeps the drive at 3.20 mm, so it clears most compact laptop and mini-PC layouts.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
