iStarUSA Inc.
iStarUSA Inc. D406-DE8BK 4U Rackmount Server Chassis 8×3.5″ Hot-Swap Bays
4U rackmount server chassis with eight 3.5″ hot-swap SAS/SATA bays and seven expansion slots
- Chassis TypeRackmount
- Form Factor4U
- ColorBlack
- Motherboard Compatibility12 x 9.6 (ATX, microATX)
- External 3.5" Drive Bays2
- Hot-Swap Drive Bays8 x 3.5"
Model D406-DE8BK
- D-406-B6SA-SILVER-ND
- D406-DE8BK
- D406ND-B6SL
- Eight hot-swap bays support SAS and SATA drives
- 4U rackmount form factor fits standard server racks
- ATX and microATX motherboard compatibility up to 12 by 9.6 inches
- Seven expansion slots provide room for add-in cards
- Single 80 mm fan delivers front-to-rear airflow
Rackmount Server Chassis with Eight Hot-Swap Bays
The iStarUSA D406-DE8BK is a 4U rackmount server chassis designed for storage-focused deployments. It accommodates ATX and microATX motherboards up to 12 x 9.6 inches. Eight front-accessible 3.5-inch bays support SAS and SATA drives for high-density arrays. Two additional external and two internal 3.5-inch bays provide extra flexibility.
Capacity and Headroom for Storage Arrays
Eight hot-swap bays allow drive replacement without downtime, suited for RAID configurations or bulk storage. Two external 3.5-inch bays can hold backup devices or media readers. Two internal 3.5-inch bays secure fixed drives. Seven expansion slots support multiple add-in cards such as RAID controllers or network adapters. A single 80mm fan provides baseline airflow; dense drive loads may require supplementary cooling.
Build Integration and Freed Resources
The 4U form factor fits standard server racks, freeing floor space compared to tower alternatives. Hot-swap trays streamline maintenance, reducing service time. SAS and SATA compatibility lets builders mix drive types without backplane changes. Seven slots leave room for specialised I/O after a primary controller is installed. External bays keep removable media accessible at the front panel.
Öne çıkanlar
- Eight hot-swap bays support SAS and SATA drives
- 4U rackmount form factor fits standard server racks
- ATX and microATX motherboard compatibility up to 12 by 9.6 inches
- Seven expansion slots provide room for add-in cards
- Single 80 mm fan delivers front-to-rear airflow
Teknik özellikler
| Brand | iStarUSA |
|---|---|
| Model | D406-DE8BK |
| Chassis Type | Rackmount |
| Form Factor | 4U |
| Color | Black |
| Motherboard Compatibility | 12 x 9.6 (ATX, microATX) |
| External 3.5" Drive Bays | 2 |
| Hot-Swap Drive Bays | 8 x 3.5" |
| Internal 3.5" Drive Bays | 2 |
| Expansion Slots | 7 |
| 80mm Fans | 1 |
| Features | Front Bezel Color: Black Hotswap HDD Interface: SAS/SATA Color of HDD Tray: Black |
| Kargo ağırlığı | 16.85 kg |
| Koli boyutu | 683 × 554 × 284 mm |
Bu modelin diğer sürümleri
Aynı seriden 2 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
iStarUSA Inc.
iStarUSA Inc. D-406-B6SA-SILVER-ND 4U Server Chassis 6 Hot-Swap Bays 20.8" Depth
- Rackmount
- 4U
$377,99
0.00489827BTC
StoktaBu ürünle ilgili sorular
Will my existing SAS and SATA hard drives fit the eight 3.5" hot-swap bays?
The eight hot-swap bays accept both SAS and SATA 3.5" drives, so your current drives will slide straight in.
How can I confirm the single 80mm fan is spinning after I power on the chassis?
Listen for the fan at the rear and watch the front LED indicators; steady airflow and lit drive LEDs show the cooling is active.
Are rails and drive trays included, or do I need to buy them separately?
The chassis ships with eight black hot-swap trays and mounting hardware; rails are not included and must be purchased separately.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.002786BTC
Stokta
