Kingston Technology Corp.
Kingston Technology Corp. KN2M64-ETB 8GB DDR3-1600 laptop RAM 1.35V CL11 204-pin
8GB DDR3 1600 SO-DIMM laptop memory module with 1.35V low voltage and CL11 timing
- Capacity8GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1600 (PC3 12800)
- Voltage1.35V
- ECCNo
- Buffered/RegisteredUnbuffered
- 8 GB capacity lets you run more apps together
- DDR3 1600 speed moves data at PC3 12800 bandwidth
- 35 V low voltage reduces power draw and heat
- CL11 latency keeps response tight for everyday tasks
- 204 pin SO DIMM fits standard laptop memory slots
Capacity and fit
This 8 GB DDR3 SO-DIMM kit is built for notebooks and small-form-factor systems that use 204-pin slots. It suits owners upgrading older laptops or replacing a failed module with a matching low-voltage part.
Thermals and power
Operating at 1.35 V reduces heat output and power draw compared with standard 1.5 V DDR3, helping the memory run cooler inside cramped chassis. The unbuffered design adds no extra electrical load on the memory controller.
Build integration
The dual-channel kit fills two slots for balanced bandwidth without requiring a matched single stick. CL11 latency and 1600 MHz speed work with existing DDR3 controllers, freeing the buyer from hunting for higher-frequency modules that the platform may not support.
Öne çıkanlar
- 8 GB capacity lets you run more apps together
- DDR3 1600 speed moves data at PC3 12800 bandwidth
- 35 V low voltage reduces power draw and heat
- CL11 latency keeps response tight for everyday tasks
- 204 pin SO DIMM fits standard laptop memory slots
Teknik özellikler
| Brand | Kingston |
|---|---|
| Model | KN2M64-ETB |
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1600 (PC3 12800) |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
Bu ürünle ilgili sorular
How do I install this 204-pin DDR3 SO-DIMM and which step often goes wrong?
Power off the laptop, remove the battery if accessible, open the memory hatch, align the notch on the module with the slot key, insert at an angle, then press down firmly until both side clips click — the step most people miss is pressing hard enough to engage both clips.
What maintenance or replacement will this 8GB DDR3-1600 module need later?
No scheduled maintenance is required; replacement is only needed if a memory test reports errors, if the laptop fails to boot with the module seated, or if you upgrade to a higher capacity or newer DDR generation.
What limit appears first when this CL11 1.35V kit runs under sustained load?
The CAS latency of 11 cycles at 1600 MHz sets the access timing ceiling, so sustained workloads hit the latency bound before the 1.35 V low-voltage headroom or the dual-rank density become limiting factors.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



