Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Green circuit board with dual camera modules, dual HDMI ports, Ethernet jack, USB and microSD slots

LORDWORLD

LORDWORLD Binocular Camera Base Board for CM4 Dual 8MP Dual HDMI 4K 30fps

SKU CH-JPR5-AJ341

A binocular camera base board for Raspberry Pi Compute Module 4 with dual 8MP cameras at 3280 × 2464 and dual HDMI 4K 30fps output

  • Dual 8MP cameras capture sharp 3280 × 2464 images for detailed stereo vision
  • Dual HDMI ports deliver independent 4K 30fps video streams to two displays
  • Standard CM4 socket accepts both Lite and eMMC Compute Module 4 variants
  • Built-in Ethernet, USB and Micro SD interfaces simplify peripheral connectivity
  • Ready for immediate evaluation or direct integration into finished products

Binocular Camera Base for CM4

The LORDWORLD base board accepts a Raspberry Pi Compute Module 4 Lite or eMMC variant through a standard CM4 socket. It adds Ethernet, HDMI, Micro SD and USB interfaces so developers can evaluate the module or embed it directly into a finished IoT device.

Dual 8MP cameras and dual 4K output

Two 8MP cameras each capture up to 3280 × 2464 resolution for stereo vision tasks such as depth mapping or object recognition. Dual HDMI ports drive two independent 4K displays at 30 frames per second, giving ample headroom for side-by-side video walls or simultaneous preview and recording. The board reaches its limit when an application demands higher frame rates or resolutions beyond 4K 30fps per channel.

Upgrade from single-camera carrier boards

Engineers moving from a single-camera CM4 carrier gain hardware-synchronised stereo imaging without designing a custom PCB. The jump is worth it when a project needs real-time depth perception, 3D scanning or dual-display output, while the existing CM4 module and power supply can be reused. Builders who only need a single camera or lower-resolution streaming will not benefit from the added complexity.

Öne çıkanlar

  • Dual 8MP cameras capture sharp 3280 × 2464 images for detailed stereo vision
  • Dual HDMI ports deliver independent 4K 30fps video streams to two displays
  • Standard CM4 socket accepts both Lite and eMMC Compute Module 4 variants
  • Built-in Ethernet, USB and Micro SD interfaces simplify peripheral connectivity
  • Ready for immediate evaluation or direct integration into finished products

Teknik özellikler

BrandLORDWORLD

Bu ürünle ilgili sorular

Will the dual 8MP cameras on this LORDWORLD board work with a Raspberry Pi Compute Module 4 Lite that I already own?

The board uses a standard CM4 socket and is compatible with both Compute Module 4 Lite and eMMC variants, so your existing CM4 Lite will connect directly.

How can I verify the dual 4K 30fps HDMI outputs are functioning correctly after I install the Compute Module 4?

Connect each HDMI port to a 4K display; both should show a 30fps signal at up to 3280 × 2464 resolution per camera when the CM4 is running compatible software.

Does the package include the Compute Module 4 and microSD card, or do I need to purchase them separately?

The base board provides ETH, HDMI, microSD and USB interfaces for the CM4, but the Compute Module 4 itself and a microSD card are not included and must be bought separately.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.