Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Rectangular green circuit board with four blue USB ports and a USB-C power connector

LORDWORLD

LORDWORLD USB 3.2 Gen1 HUB HAT Expansion Board 4 Ports development board

SKU CH-2BSZ-6VG1K

Adds four USB 3.2 Gen1 ports to a Raspberry Pi with an onboard USB-C power input and per-port status LEDs

  • Add four high-speed USB ports to a Raspberry Pi
  • Backwards compatible with USB 3.0, 2.0 and 1.1 devices
  • External USB-C 5 V input keeps power stable under load
  • Works driver-free on Windows, macOS, Linux and Android
  • Five status LEDs show power and each port's activity at a glance

Raspberry Pi USB 3.2 Gen1 HUB HAT

The LORDWORLD expansion board adds four USB 3.2 Gen1 ports to a Raspberry Pi 4 and is also compatible with other Raspberry Pi versions. It provides a driver-free, plug-and-play experience across Windows, macOS, Linux and Android. Status LEDs show power and individual port activity for quick diagnostics.

USB 3.2 Gen1 bandwidth and backward compatibility

Each port operates at USB 3.2 Gen1 speeds and remains compatible with USB 3.0, 2.0 and 1.1 devices. The shared upstream link to the Raspberry Pi means total throughput is limited by the host controller, so sustained transfers on multiple ports will not exceed the single USB 3.2 Gen1 channel.

Check power delivery and physical fit before

An onboard USB-C 5V DC input supplies extra current for power-hungry peripherals; verify your power adapter can deliver sufficient amperage for all connected devices. Ensure the HAT form factor matches your Raspberry Pi model and that enclosure clearance accommodates the four stacked USB-A sockets.

Öne çıkanlar

  • Add four high-speed USB ports to a Raspberry Pi
  • Backwards compatible with USB 3.0, 2.0 and 1.1 devices
  • External USB-C 5 V input keeps power stable under load
  • Works driver-free on Windows, macOS, Linux and Android
  • Five status LEDs show power and each port's activity at a glance

Teknik özellikler

BrandLORDWORLD

Bu ürünle ilgili sorular

Does this HAT provide the four USB 3.2 Gen1 ports in a single version, or are there alternative port counts available?

The board comes in one configuration with exactly four USB 3.2 Gen1 ports and a USB-C 5 V DC power input; no other port-count versions are offered.

What real-world transfer rate can I expect from the four USB 3.2 Gen1 ports when the HAT is mounted on a Raspberry Pi 4?

Each port runs at USB 3.2 Gen1 speed (5 Gbps) and is backward compatible with USB 3.0, 2.0 and 1.1 devices; the Pi 4’s single upstream lane shares that bandwidth across all four ports.

Which host interface does the HAT use, and does it limit the total throughput of the four ports?

The HAT connects through the Raspberry Pi’s 40-pin GPIO header using the Pi’s native USB 3.2 Gen1 lane, so the combined throughput of all four ports cannot exceed that single 5 Gbps upstream link.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.