BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00279855BTC
Stokta
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 UDIMM Kit for ASRock TRX40 Taichi
16 GB dual-channel DDR4 3200 CL22 kit validated for the ASRock TRX40 Taichi motherboard
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts multitasking capacity
- DDR4 3200 speed delivers responsive desktop performance
- CL22 latency supports stable system operation
- 2 V low voltage reduces power draw
- Validated for ASRock TRX40 Taichi motherboard compatibility
ASRock TRX40 Taichi Compatible Kit
This 16 GB kit contains two 8 GB DDR4 UDIMM modules validated for the ASRock TRX40 Taichi motherboard. It targets builders and upgraders who need guaranteed compatibility with that specific platform. The unbuffered, non-ECC design suits standard desktop workloads. Buyers requiring registered ECC memory for server-grade error correction cannot use this kit.
Sustained Load Behaviour
Modules operate at 1.20 V with CL22 timings at the rated 3200 MT/s data rate. The 1Rx8 organisation and major OEM DRAM chips are stress tested under load to maintain stability during extended sessions. Absence of a heat spreader means airflow across the PCB becomes the primary cooling path. Systems with restricted DIMM ventilation may see higher temperatures during prolonged heavy use.
DDR4 Interface Limits
The 288-pin DDR4 interface delivers a peak transfer rate of PC4-25600. Bandwidth and latency are bounded by the DDR4 standard and the motherboard memory controller capabilities. This kit does not support DDR5 platforms or higher DDR4 frequencies beyond the validated 3200 MT/s. Builders needing greater density per module or faster transfer rates must select a different memory specification.
Öne çıkanlar
- 16 GB dual-channel kit boosts multitasking capacity
- DDR4 3200 speed delivers responsive desktop performance
- CL22 latency supports stable system operation
- 2 V low voltage reduces power draw
- Validated for ASRock TRX40 Taichi motherboard compatibility
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASRock |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Bu ürünle ilgili sorular
Does the 1.2 V DDR4 kit run hot or loud under continuous load?
The modules operate at 1.2 V with no heat spreader, so they rely on case airflow; they have no moving parts and produce no noise.
What must my system already have to use this 288-pin UDIMM kit?
A motherboard with DDR4 UDIMM slots that supports 3200 MT/s operation, such as the ASRock TRX40 Taichi, and an available pair of slots for the two 8 GB modules.
Will the CL22 timing work alongside older DDR4 sticks I keep installed?
The kit runs at CL22; mixing with slower or different-latency modules will force the system to run all memory at the lowest common speed and latency.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
