Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 2666MHz CL19 ECC UDIMM ASUS Pro WS C246-ACE memory upgrade

SKU CH-MZXF-W0N2B

16 GB DDR4-2666 ECC UDIMM with CL19 timing and 1.2 V operation for the ASUS Pro WS C246-ACE workstation motherboard

  • Capacity16GB
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes

Size 16GB

  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • Exact-match 16GB DDR4-2666 CL19 1.2V 2Rx8 UDIMM recognised at full rated speed
  • Verified fit for ASUS Pro WS C246-ACE 288-pin Unbuffered ECC slot requirements
  • Major OEM Samsung Micron Hynix chips deliver consistent reliability for workstation workloads
  • Lifetime replacement warranty with free US-based technical support included

Exact-match DDR4 ECC UDIMM for ASUS C246-ACE

This 16 GB DDR4-2666 module is built to the precise rank, voltage and timing the ASUS Pro WS C246-ACE workstation motherboard expects. It installs as a 288-pin unbuffered ECC UDIMM so the board recognises full capacity at rated speed without manual tuning.

CL19 at 1.2 V decides compatibility

The memory controller on this platform requires CAS latency 19 at 1.20 V with a 2Rx8 organisation. Any different latency, voltage or rank structure will prevent the system from booting or force a down-clock that wastes the installed capacity.

Passive operation keeps thermals simple

Without a heat spreader the module relies on chassis airflow and runs at the standard 1.20 V DDR4 voltage. Power draw stays low, noise is limited to case fans, and temperatures remain within normal limits for typical workstation workloads.

Öne çıkanlar

  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • Exact-match 16GB DDR4-2666 CL19 1.2V 2Rx8 UDIMM recognised at full rated speed
  • Verified fit for ASUS Pro WS C246-ACE 288-pin Unbuffered ECC slot requirements
  • Major OEM Samsung Micron Hynix chips deliver consistent reliability for workstation workloads
  • Lifetime replacement warranty with free US-based technical support included

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME21300-628K1
Capacity16GB
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASUS
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR4 2666MHz PC4-21300 2Rx8 1.2V 288-PIN ECC UDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Will the 2666 MHz rating run at that speed in my ASUS Pro WS C246-ACE?

The module is spec-matched to the board's DDR4 2666 (PC4-21300) memory controller, so it is recognized at full capacity and runs at the rated 2666 MHz with CL19 timing.

Does the 288-pin ECC UDIMM interface limit me to unbuffered modules only?

Yes, this is a 288-pin unbuffered ECC UDIMM; the motherboard requires this exact form factor and will not accept registered RDIMMs or SODIMMs.

What physical clearance does the 16 GB stick need inside the case?

The module has no heat spreader, so it fits the standard 288-pin DDR4 UDIMM slot height used by the ASUS Pro WS C246-ACE without extra clearance.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.