Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Green printed circuit board with black memory chips and gold edge contacts

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1.1V 288-pin UDIMM SuperMicro MBD-C9Z790-CG memory upgrade

SKU CH-Z8KQ-69AKE

16 GB DDR5 5600 CL46 1.1 V 288-pin UDIMM for SuperMicro MBD-C9Z790-CG workstations

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 16GB

  • Boosts system responsiveness with 16GB DDR5 5600 speed
  • Low 1.1V operation reduces power draw and heat
  • CL46 latency keeps data flowing smoothly
  • 288-pin UDIMM fits SuperMicro MBD-C9Z790-CG boards
  • Tested 1Rx8 modules ensure stable, compatible performance

System-Specific DDR5 Upgrade

This 16 GB DDR5 module is validated for the SuperMicro MBD-C9Z790-CG workstation motherboard. It targets IT professionals and builders who need guaranteed compatibility without manual tuning. The single-rank 1Rx8 organisation keeps the memory controller load low for stable operation. Buyers who need ECC protection or registered DIMMs for multi-socket servers cannot use this unbuffered non-ECC kit.

Thermals and Power Profile

Operating at 1.1 V, the module draws minimal power for a DDR5 device. No heat spreader is fitted, so airflow across the bare PCB handles cooling in standard chassis layouts. The low voltage and single-rank design keep thermals predictable during sustained workloads. Systems with restricted DIMM spacing or limited case ventilation should verify airflow before installation.

Package Contents and Validation

The box contains one 16 GB UDIMM tested under load for reliability. Each stick is stress-tested by the supplier to confirm stability at 5600 MT/s with CL46 timings. No additional software, cables or mounting hardware are included. Builders who expect bundled configuration utilities or diagnostic tools will need to source them separately.

Öne çıkanlar

  • Boosts system responsiveness with 16GB DDR5 5600 speed
  • Low 1.1V operation reduces power draw and heat
  • CL46 latency keeps data flowing smoothly
  • 288-pin UDIMM fits SuperMicro MBD-C9Z790-CG boards
  • Tested 1Rx8 modules ensure stable, compatible performance

Teknik özellikler

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5600MHZ Non-ECC Unbuffered UDIMM
Part NumberMD44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How do I install this 288-pin DDR5 UDIMM in the SuperMicro MBD-C9Z790-CG, and what step do people often miss?

Align the notch on the module with the slot key, press firmly until both retention clips click shut, then verify the BIOS shows 5600 MT/s and 1Rx8 rank — many forget to enable XMP or the equivalent DDR5 profile.

What maintenance or replacement will this 16 GB non-ECC module need later?

No scheduled maintenance is required; if errors appear, run a memory diagnostic and replace the stick — ECC is not present to correct single-bit faults.

What limit appears first under sustained load with this CL46 1.10 V kit?

The CAS latency of 46 cycles at 5600 MT/s sets the baseline response time; thermal throttling is unlikely without a heat spreader, so latency remains the primary constraint.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.