Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 192GB kit

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 CL46 ECC RDIMM server RAM

SKU CH-FRY8-MBQRY

A 192GB DDR5 registered ECC server memory kit with two 96GB modules running at 5600MHz CL46 and 1.10V

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Capacity 192GB (2 x 96GB)

  • 192 GB total capacity from two 96 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • ECC registered design protects data integrity
  • CL46 CAS latency at 1.1 V operation
  • Built with Samsung Micron or Hynix DRAM chips

192GB DDR5 ECC RDIMM kit

This NEMIX RAM kit provides 192GB of DDR5 ECC registered memory in two 96GB modules. It is built for servers and workstations that require error correction and registered signal integrity. The 288-pin RDIMM form factor fits compatible DDR5 server platforms. IT professionals choose this memory for mission-critical environments demanding stability.

Sustained load behaviour

Modules are rigorously stress tested under load to ensure reliability during continuous operation. The registered design reduces electrical loading on the memory controller, helping maintain signal quality over long periods. ECC functionality detects and corrects single-bit errors in real time, preventing data corruption during extended workloads. The 1.1V operating voltage supports efficient power draw under sustained utilisation.

DDR5 interface limits

The kit operates at DDR5 5600 (PC5-44800) with a CAS latency of CL46, defining the standard timing envelope for this speed grade. Each module uses a 2Rx4 organisation, which affects maximum capacity per channel on the platform. Registered buffering adds one clock cycle of latency compared to unbuffered modules, a fixed characteristic of the RDIMM standard. Motherboard memory-controller capabilities ultimately determine the achievable configuration.

Öne çıkanlar

  • 192 GB total capacity from two 96 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • ECC registered design protects data integrity
  • CL46 CAS latency at 1.1 V operation
  • Built with Samsung Micron or Hynix DRAM chips

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Memory Motherboard Compatible

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How much heat and power will the 1.10V DDR5 5600 RDIMMs add to a server running 24/7?

The modules operate at 1.10V DDR5 standard voltage, which is lower than previous DDR generations. With no heat spreader, they rely on chassis airflow for cooling. Registered buffering and ECC add minimal controller overhead, so sustained power draw stays close to the rated 1.10V per DIMM under typical server loads.

What motherboard slot and memory channel requirements must my system already have to use this 288-pin DDR5 RDIMM kit?

You need a motherboard with DDR5 RDIMM slots (288-pin) that supports registered ECC memory, PC5-44800 speed, and 2Rx4 rank configuration. The platform must also accept 96GB per DIMM density and provide enough memory channels for the 2-module kit to run at 5600MT/s.

Will the CL46 5600 modules work alongside older DDR5 RDIMMs I already own?

Mixing is possible only if the existing modules are also DDR5 RDIMM ECC registered with matching 2Rx4 rank, 1.10V voltage, and 5600MT/s speed. The memory controller will train all DIMMs to the slowest common timing, so CL46 becomes the baseline. Mismatched ranks, voltages or speeds will prevent boot or force downgraded operation.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.