SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00497027BTC
Stokta
NEMIX RAM
NEMIX RAM 192GB 2x96GB DDR5 6400MHz CL52 1.1V 2Rx4 ECC Registered RDIMM Supermicro H14SHM memory upgrade
A 192 GB DDR5-6400 ECC registered RDIMM kit with CL52 timing and 1.1 V operation, validated for the Supermicro H14SHM motherboard
- Capacity192GB (2 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB capacity with two 96 GB modules for full server utilisation
- DDR5 6400 speed rated at PC5-51200 for high throughput
- CL52 latency at 1.1 V for efficient operation
- 2Rx4 Registered ECC RDIMM for error correction and signal integrity
- Verified fitment for Supermicro H14SHM motherboard with 288-pin form factor
NEMIX RAM 192GB DDR5-6400 ECC RDIMM Kit
This NEMIX RAM kit delivers 192GB of DDR5-6400 server memory in a 2x96GB configuration. It uses 288-pin Registered ECC RDIMM modules rated at CL52 and 1.1V. The kit is validated for the Supermicro H14SHM motherboard.
For Supermicro H14SHM Servers Only
This memory suits administrators upgrading a Supermicro H14SHM system that requires Registered ECC RDIMMs. It is not for builds needing UDIMM, SODIMM, or non-ECC modules, or for any platform outside the validated Supermicro H14SHM compatibility list.
2Rx4 Rank and 1.1V Voltage Match
The 2Rx4 organization and 1.1V operating voltage match the Supermicro H14SHM memory controller requirements exactly. Using modules with a different rank structure or voltage will prevent the system from recognizing the full 192GB capacity at the rated DDR5-6400 speed.
Öne çıkanlar
- 192 GB capacity with two 96 GB modules for full server utilisation
- DDR5 6400 speed rated at PC5-51200 for high throughput
- CL52 latency at 1.1 V for efficient operation
- 2Rx4 Registered ECC RDIMM for error correction and signal integrity
- Verified fitment for Supermicro H14SHM motherboard with 288-pin form factor
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Bu ürünle ilgili sorular
What motherboard slot type is required for this 288-pin DDR5 RDIMM kit to work?
The Supermicro H14SHM motherboard must provide 288-pin DDR5 RDIMM slots; this kit will not fit UDIMM or SODIMM sockets.
Will these 96GB 2Rx4 Registered ECC modules operate alongside existing RDIMMs of different capacity on the H14SHM?
The H14SHM memory population rules determine whether mixed capacities are allowed; consult the board manual for approved configurations before installing.
How can I verify the kit is running at DDR5 6400 CL52 1.1V after installation?
Check the BIOS memory information or a tool such as dmidecode to confirm speed 6400 MT/s, CAS latency 52, voltage 1.1 V and that both 96 GB modules are detected.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
