Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Four green DDR5 RDIMM modules with black chips and gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 192GB (4 x 48GB) DDR5 5600 CL46 2Rx8 1.1V ECC Registered RDIMM for Supermicro H14SSF memory upgrade

SKU CH-9JE0-H7H3Y

A 192 GB DDR5 registered ECC kit of four 48 GB modules running at 5600 MT/s with CL46 latency and 1.1 V operation, built for the Supermicro H14SSF motherboard

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

24 yapılandırma daha gösterin
  • 192 GB capacity across four 48 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14SSF
  • Registered ECC architecture with 2Rx8 organisation corrects single-bit errors and stabilises full-slot population
  • 10 V operating voltage matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the required DIMM slots without adapters

192GB DDR5 5600 kit for Supermicro H14SSF

This 192GB kit contains four 48GB DDR5 5600 registered ECC RDIMMs built for the Supermicro H14SSF motherboard. Each module runs at 1.10V with CL46 latency and a 2Rx8 organisation. The registered design and ECC support match the platform's memory controller requirements for full-capacity recognition.

Sustained load stability with registered ECC

Registered buffering reduces electrical load on the memory controller so all slots operate reliably when fully populated at rated speed. ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during continuous server workloads.

Straightforward RDIMM installation if the manual

The 288-pin RDIMMs seat like standard server memory, but population order and supported capacities are defined by the H14SSF manual. Builders who skip the population rules or exceed approved configurations will see modules unrecognised or the system fail to post.

Öne çıkanlar

  • 192 GB capacity across four 48 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14SSF
  • Registered ECC architecture with 2Rx8 organisation corrects single-bit errors and stabilises full-slot population
  • 10 V operating voltage matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the required DIMM slots without adapters

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How much heat and power will the 1.10 V DDR5 5600 kit draw when the Supermicro H14SSF runs fully populated all day?

Each 48 GB module operates at 1.10 V with no heat spreader, so sustained power draw and thermals follow the server platform's own airflow design and the DDR5 5600 JEDEC base specification.

What motherboard and firmware must I already have for this 4 x 48 GB RDIMM kit to be recognised at full capacity?

A Supermicro H14SSF motherboard with BIOS that supports 2Rx8 Registered ECC DDR5 5600 population rules; the kit matches the board's 288-pin RDIMM slot layout and registered architecture.

Can I keep my existing DDR5 4800 RDIMMs installed alongside this CL46 5600 kit in the same H14SSF?

Mixing speeds or ranks is not validated; the board will down-clock all channels to the slowest common JEDEC rate and may require specific slot population order from the manual.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.