SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00501779BTC
Stokta
NEMIX RAM
NEMIX RAM 1TB (8x128GB) DDR5 6400 CL52 1.1V 2Rx4 ECC Registered RDIMM Supermicro H14DSG-OM memory upgrade
Eight 128 GB DDR5 registered ECC modules run at 6400 MT/s with CL52 latency and 1.1 V for full-capacity stability in the Supermicro H14DSG-OM
- Capacity1TB (8 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 1TB capacity with eight 128GB modules for maximum server density
- DDR5 6400 speed (PC5-51200) at CL52 latency for rated performance
- 1V registered ECC RDIMM architecture ensures stability under full load
- 2Rx4 dual-rank organisation matches Supermicro H14DSG-OM memory controller expectations
- 288-pin RDIMM form factor verified for exact motherboard fitment
Server Memory Kit for Supermicro H14DSG-OM
This NEMIX RAM kit delivers 1TB of DDR5 capacity across eight 128GB registered DIMMs. It is built for administrators upgrading a Supermicro H14DSG-OM motherboard that requires 288-pin RDIMMs with ECC and registered buffering.
Replaces partial or mixed-capacity populations
Swapping an incomplete or mismatched set for this uniform 8x128GB kit lets the memory controller run every slot at DDR5 6400 with CL52 timings and 1.1V operation. The jump is worth it when your board’s population rules demand identical rank, voltage and timing across all channels to reach full rated speed.
Handles fully populated enterprise workloads
Eight dual-rank modules provide the headroom for large virtualisation clusters, in-memory databases and heavy compute jobs that benefit from maximum registered ECC capacity. The kit runs out when the motherboard’s maximum supported memory per socket or total system limit is lower than the installed 1TB.
Öne çıkanlar
- 1TB capacity with eight 128GB modules for maximum server density
- DDR5 6400 speed (PC5-51200) at CL52 latency for rated performance
- 1V registered ECC RDIMM architecture ensures stability under full load
- 2Rx4 dual-rank organisation matches Supermicro H14DSG-OM memory controller expectations
- 288-pin RDIMM form factor verified for exact motherboard fitment
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K8 |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1TB 8X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Bu ürünle ilgili sorular
Will the 288-pin DDR5 RDIMM modules fit the Supermicro H14DSG-OM motherboard slots?
Yes, the kit uses the exact 288-pin Registered DDR5 form factor required by the H14DSG-OM, so every module seats correctly in the board's DIMM slots.
What is the correct installation order for the eight 128GB modules on the H14DSG-OM?
Follow the motherboard manual's population sequence — typically filling one DIMM per channel per CPU first — so the memory controller recognises all 1TB at DDR5-6400 CL52.
When should I expect to replace these DDR5 ECC RDIMMs in a production server?
Replace a module only if ECC logs show uncorrectable errors or the server reports a DIMM failure; otherwise the registered design and 1.1V operation are rated for continuous server lifecycles.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
