NEMIX RAM
NEMIX RAM 2TB (16x128GB) DDR4 3200 PC4-25600 4Rx4 CL22 288-Pin ECC RDIMM THINKMATE XF4-24S3 memory upgrade
A 2 TB DDR4 3200 registered ECC kit of sixteen 128 GB modules built for Thinkmate XF4-24S3 workstations
- Capacity2TB (16 x 128GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- Massive 2TB capacity from sixteen 128GB modules
- DDR4 3200 speed with CL22 latency for responsive server workloads
- ECC registered design detects and corrects data errors automatically
- Low 1.2V operation reduces power draw in dense configurations
- Built with major OEM chips and stress-tested for mission-critical stability
2TB DDR4 ECC RDIMM kit
This 2TB kit contains sixteen 128GB DDR4 3200 registered DIMMs built for the Thinkmate XF4-24S3 workstation. Each module operates at 1.20V with a CAS latency of CL22 and uses a 4Rx4 organisation. The ECC registered design targets enterprise workloads that require error correction and signal integrity across large memory populations.
Sustained-load behaviour
Registered buffering reduces electrical load on the memory controller when all sixteen slots are populated, helping maintain stability during extended compute tasks. ECC circuitry corrects single-bit errors on the fly, preventing data corruption in long-running applications. The 1.20V operating voltage keeps power draw predictable across the full 2TB capacity.
Upgrade context
This kit replaces smaller-capacity RDIMM sets when the workstation needs the maximum supported memory for virtualisation, in-memory databases or large-scale rendering. The jump is worthwhile when the current configuration cannot hold the working set and the platform supports 128GB 4Rx4 modules at DDR4 3200. Buyers who need non-ECC unbuffered memory or capacities beyond 2TB should look elsewhere.
Öne çıkanlar
- Massive 2TB capacity from sixteen 128GB modules
- DDR4 3200 speed with CL22 latency for responsive server workloads
- ECC registered design detects and corrects data errors automatically
- Low 1.2V operation reduces power draw in dense configurations
- Built with major OEM chips and stress-tested for mission-critical stability
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-744K16 |
| Capacity | 2TB (16 x 128GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 4Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 2TB (16X128GB) DDR4 3200MHZ PC4-25600 4Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
Bu ürünle ilgili sorular
How much heat and power does the 1.2 V DDR4 3200 kit draw when the ThinkMate XF4-24S3 runs continuously?
Each 128 GB RDIMM operates at 1.2 V standard DDR4 voltage, so the 16-module kit stays within normal server DIMM thermal limits without extra cooling.
What must the ThinkMate XF4-24S3 already have to accept this 2 TB registered ECC kit?
The workstation needs a DDR4 RDIMM-capable motherboard with 16 free 288-pin slots and a CPU memory controller that supports 4Rx4 registered ECC modules.
Will the 4Rx4 CL22 modules work alongside older 2Rx4 DDR4 DIMMs I keep in the same ThinkMate?
Mixing 4Rx4 and 2Rx4 ranks is not recommended; the memory controller will default to the slowest common timing and may limit total capacity per channel.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
Silverstone
Silverstone RM22-312 2U 12-bay 2.5" / 3.5" server chassis
- Rackmount
$444,99
0.00568336BTC
Stokta
iStarUSA Inc.
iStarUSA Inc. D400-6SE-B6SA-SL 4U Rackmount Server Chassis 6 Hot-Swap Bays
- Rackmount
- 4U
$459,99
0.00587494BTC
Stokta