BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00278304BTC
Stokta
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V UDIMM for ASRock IMB-1317
32 GB DDR5 kit with two 16 GB UDIMM modules at 5600 MT/s, CL46, 1.1 V, validated for ASRock IMB-1317 and IMB-X1317 motherboards
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit expands capacity for demanding workloads
- Dual 16 GB modules enable dual-channel throughput
- DDR5 5600 speed delivers high data rates
- Low 1.1 V operation reduces power draw
- Validated for ASRock IMB-1317 and IMB-X1317 motherboards
System-specific DDR5 kit for ASRock IMB-1317
This 32 GB kit contains two 16 GB UDIMMs rated at DDR5 5600 with CL46 latency and 1.10 V operation. Modules are non-ECC, unbuffered and use a 288-pin layout built from major OEM chips. The part number is MD44800-618K2 and it is validated for ASRock Industrial micro-ATX boards IMB-1317 and IMB-X1317.
Builders who need ECC or registered memory
Buyers who need error-correcting code support or registered modules must choose a different kit because this product is strictly non-ECC and unbuffered. Systems requiring voltages other than 1.10 V or a different pin count are also not served by this memory.
DDR5 5600 CL46 1.10 V UDIMM specification
The decisive specification is the DDR5 5600 speed with CL46 timing at 1.10 V in a 288-pin unbuffered non-ECC UDIMM form factor. If your ASRock IMB-1317 or IMB-X1317 platform requires this exact combination the kit will fit; otherwise it will not be compatible.
Öne çıkanlar
- 32 GB kit expands capacity for demanding workloads
- Dual 16 GB modules enable dual-channel throughput
- DDR5 5600 speed delivers high data rates
- Low 1.1 V operation reduces power draw
- Validated for ASRock IMB-1317 and IMB-X1317 motherboards
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock Industrial |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Bu ürünle ilgili sorular
What speed and bandwidth does the DDR5 5600 PC5-44800 interface deliver?
The kit runs at DDR5 5600 with a PC5-44800 rating, giving a maximum transfer rate of 44800 MB/s.
Will the 288-pin UDIMM modules fit the ASRock IMB-1317 and IMB-X1317 Micro-ATX boards?
Yes, the 288-pin DDR5 UDIMM form factor matches the DIMM slots on both the IMB-1317 and IMB-X1317 motherboards.
How do I install the two 16 GB sticks, and what step is often missed?
Power off, open the case, align each module notch with the slot key, press firmly until the retention clips click, then enable XMP or set 5600 MT/s in BIOS — many forget the BIOS step and run at a lower speed.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
