BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.0028093BTC
Stokta
NEMIX RAM
NEMIX RAM 32GB DDR4 2666MHz CL19 2Rx8 260-PIN SODIMM QNAP Compatible
A 32 GB DDR4 SODIMM running at 2666 MHz with CL19 latency, built for QNAP systems
- Capacity32GB
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity expands multitasking headroom for demanding QNAP workloads
- DDR4 2666 MHz speed matches the platform specification for stable throughput
- CL19 latency and 1.2 V operation balance responsiveness with low power draw
- 2Rx8 dual-rank organisation increases memory density within a single SODIMM slot
- 260-pin SODIMM form factor fits directly into compatible QNAP NAS bays
Capacity and Form Factor
This module delivers 32GB of DDR4 memory in a single 260-pin SODIMM package. It is built for QNAP NAS appliances that accept non-ECC unbuffered laptop memory. Buyers needing ECC error correction or registered DIMMs for server platforms cannot use this stick.
Speed and Latency Headroom
Rated at 2666MHz with a CL19 timing, the module operates at 1.2V and follows the PC4-21300 standard. It provides ample bandwidth for typical NAS workloads such as file serving and virtualization. Systems requiring higher frequencies or lower latencies will not benefit from this specific rating.
Compatibility and Installation
The stick uses major OEM chips from Samsung, Micron or Hynix and carries the QNAP part reference RAM-32GDR4T0-SO-2666. Installation is a straightforward slot insertion that most users complete in minutes. No heat spreader is included, so airflow in compact bays should be verified.
Öne çıkanlar
- 32 GB capacity expands multitasking headroom for demanding QNAP workloads
- DDR4 2666 MHz speed matches the platform specification for stable throughput
- CL19 latency and 1.2 V operation balance responsiveness with low power draw
- 2Rx8 dual-rank organisation increases memory density within a single SODIMM slot
- 260-pin SODIMM form factor fits directly into compatible QNAP NAS bays
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS21300-328K1 |
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (1 x 32GB) DDR4 2666MHz PC4-21300 2Rx8 1.2V 260-PIN Non-ECC SODIMM |
Bu ürünle ilgili sorular
Will this 2666MHz CL19 SODIMM run alongside my existing DDR4 modules in the QNAP?
The module operates at 1.2V with CL19 timing and 2Rx8 organisation. Mixing speeds will cause the system to run all modules at the speed of the slowest installed stick.
How can I verify the 32GB stick is detected at 2666MHz after installation?
Check the QNAP system information or BIOS memory section; it should report 32GB capacity, 2666MHz speed, PC4-21300 rating and CL19 latency for the new module.
What comes in the package and do I need any extra parts for the QNAP slot?
The box contains one 32GB 260-pin DDR4 SODIMM. No additional cables, brackets or heat spreaders are required for the compatible QNAP slot.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
