Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 ECC RDIMM 1Rx4 CL40 SuperMicro SYS-211SE memory upgrade

SKU CH-8V7V-WQDXG

A 32 GB DDR5 ECC registered DIMM running at 4800 MT/s with CL40 latency for SuperMicro SYS-211SE servers

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB DDR5 4800 MHz ECC RDIMM for SuperMicro SYS-211SE servers
  • CL40 latency and 1.10 V operation for stable registered performance
  • 1Rx4 Samsung, Micron or Hynix chips validated under load
  • 288-pin DDR5 form factor installs in minutes
  • Lifetime replacement warranty backed by IT support team

Compatible server memory upgrade

This 32GB DDR5 module is built for SuperMicro IoT SuperServer SYS-211SE systems. It delivers registered ECC operation for data integrity in enterprise workloads. The single-rank design fits one DIMM slot and runs at the standard 1.1V.

Registered ECC at 4800 MT/s

The module operates at DDR5 4800 (PC5-38400) with CL40 latency and 1Rx4 organisation. Registered buffering reduces electrical load on the memory controller for stable multi-DIMM populations. ECC corrects single-bit errors without interrupting service.

288-pin RDIMM for SuperMicro SYS-211SE

Installation uses a standard 288-pin DDR5 RDIMM slot on the X31SEED-F motherboard. The stick requires no heat spreader and draws 1.10V from the platform. It frees remaining DIMM slots for further capacity expansion.

Öne çıkanlar

  • 32 GB DDR5 4800 MHz ECC RDIMM for SuperMicro SYS-211SE servers
  • CL40 latency and 1.10 V operation for stable registered performance
  • 1Rx4 Samsung, Micron or Hynix chips validated under load
  • 288-pin DDR5 form factor installs in minutes
  • Lifetime replacement warranty backed by IT support team

Teknik özellikler

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Bu ürünle ilgili sorular

What does the 4800 MT/s speed mean when the module is installed in the SuperMicro SYS-211SE?

The module operates at DDR5 4800 with CL40 timing and 1.10 V, delivering the rated data rate once the server memory controller initialises it.

How does the DDR5 RDIMM interface affect usable capacity and speed in this system?

The 288-pin registered ECC RDIMM uses a 1Rx4 organisation, so the memory controller sees one rank per channel at the full 4800 MT/s rate.

What physical slot and clearance does this 32 GB stick need in the SYS-211SE chassis?

It fits a standard 288-pin DDR5 RDIMM socket and has no heat spreader, so it clears low-profile heatsinks and adjacent components.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.