SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00498848BTC
Stokta
NEMIX RAM
NEMIX RAM 384GB (4x96GB) DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM SuperMicro B13DET memory upgrade
384 GB of DDR5 ECC registered memory in a four-module kit built for SuperMicro B13DET servers
- Capacity384GB (4 x 96GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 384 GB total capacity from four 96 GB modules
- DDR5 5600 speed with CL46 latency for responsive server workloads
- ECC registered RDIMM design protects data integrity in mission-critical systems
- Low 1.10 V operating voltage reduces power draw in dense configurations
- Validated compatibility with SuperMicro B13DET motherboards for reliable deployment
384GB DDR5 RDIMM kit for SuperMicro B13DET
This 384GB kit contains four 96GB DDR5 registered DIMMs rated at 5600MT/s with CL46 latency. ECC and 2Rx4 organisation provide error correction and signal integrity for server and workstation workloads. The modules operate at 1.10V and use a 288-pin RDIMM form factor. They are built for the SuperMicro B13DET platform.
Verify B13DET memory population rules before
Confirm that the motherboard supports 96GB RDIMM density and 2Rx4 rank configuration across all four slots. Check the qualified vendor list for 5600MT/s operation at 1.10V with this specific part number. Ensure the BIOS revision on the B13DET enables the target speed and capacity. Registered ECC DIMMs require a compatible server chipset.
Passive modules run at standard DDR5 voltage
Without heat spreaders the DIMMs rely on chassis airflow for cooling at 1.10V. Registered buffering adds minimal latency while reducing electrical load on the memory controller. Power draw scales with all four slots populated at 5600MT/s. Acoustic output depends entirely on system fan curves rather than the memory itself.
Öne çıkanlar
- 384 GB total capacity from four 96 GB modules
- DDR5 5600 speed with CL46 latency for responsive server workloads
- ECC registered RDIMM design protects data integrity in mission-critical systems
- Low 1.10 V operating voltage reduces power draw in dense configurations
- Validated compatibility with SuperMicro B13DET motherboards for reliable deployment
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 384GB (4X96GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT |
Bu ürünle ilgili sorular
What does the 384GB kit include and do I need to buy anything else to install it?
The kit contains four 96GB DDR5 5600 CL46 2Rx4 1.1V ECC registered DIMMs in a 288-pin form factor. No extra components are required for installation.
How do I decide between the 4800MHz and 5600MHz speed ratings shown for this SuperMicro B13DET memory?
The modules are rated for DDR5 5600 (PC5-44800) and will run at that speed when the platform supports it; otherwise they fall back to the lower JEDEC speed automatically.
What does the CL46 latency figure mean for real-world server performance?
CL46 is the CAS latency at 5600MT/s. Registered ECC modules add one cycle of buffering, so the effective latency in nanoseconds is comparable to lower-clock unbuffered memory while providing error correction and higher capacity.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
