Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Four green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 384GB (4x96GB) DDR5 6400 CL52 2Rx4 ECC Registered RDIMM memory upgrade for Supermicro X14SRG-TF

SKU CH-XZVG-AH37X

A 384 GB kit of four 96 GB DDR5 6400 CL52 2Rx4 ECC registered RDIMMs validated for the Supermicro X14SRG-TF motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

  • 384GB 4X96GB
  • 1TB 8X128GB
  • 768GB 8X96GB
  • 512GB 4X128GB
  • 512GB 8X64GB
  • 256GB 8X32GB
  • 256GB 2X128GB
  • 256GB 4X64GB
  • 192GB 2X96GB
  • 128GB 4X32GB
  • 128GB
  • 128GB 2X64GB
4 yapılandırma daha gösterin
  • 96GB
  • 64GB 2X32GB
  • 64GB
  • 32GB

Üzeri çizili sürümler mevcuttur ancak burada stokta değildir.

  • 384 GB total capacity from four 96 GB modules for dense server workloads
  • DDR5 6400 speed with CL52 latency matching the board's rated timing
  • Registered ECC design corrects single-bit errors and buffers the memory controller
  • 1 V operation at 2Rx4 rank aligns with the platform's voltage and population rules
  • 288-pin RDIMM form factor fits the Supermicro X14SRG-TF memory slots exactly

Exact-match DDR5 kit for Supermicro X14SRG-TF

This 384 GB kit comprises four 96 GB DDR5 6400 RDIMMs built to the precise rank, voltage and timing the motherboard expects. Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly. Modules operate at 1.1 V with CL52 latency and install in the standard 288-pin slots.

Suited for servers needing maximum registered ECC

Ideal for administrators populating every slot on a Supermicro X14SRG-TF with validated DDR5-6400 RDIMMs. Not for systems that require unbuffered UDIMMs, SODIMM form factors, or lower-density modules. Builders using other motherboards must verify population rules before ordering.

Delivers 384 GB across four fully populated slots

Each 96 GB dual-rank module runs at the rated 6400 MT/s when the board supports the full configuration. Capacity scales linearly with the four-slot limit of this platform. Workloads exceeding 384 GB or requiring higher frequencies will need a different motherboard or memory topology.

Öne çıkanlar

  • 384 GB total capacity from four 96 GB modules for dense server workloads
  • DDR5 6400 speed with CL52 latency matching the board's rated timing
  • Registered ECC design corrects single-bit errors and buffers the memory controller
  • 1 V operation at 2Rx4 rank aligns with the platform's voltage and population rules
  • 288-pin RDIMM form factor fits the Supermicro X14SRG-TF memory slots exactly

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

What motherboard slot type must my Supermicro X14SRG-TF have to accept this 288-pin DDR5 RDIMM kit?

The board needs 288-pin DDR5 RDIMM slots; this kit is built for that exact form factor and will not fit UDIMM or SODIMM sockets.

Will the registered ECC design of these 2Rx4 modules let me populate all four slots at the full 6400 speed?

Yes, the registered architecture buffers the control lines so the memory controller can run every slot fully populated at the rated 6400 MT/s without signal degradation.

After installation, how can I confirm the kit is running at its specified CL52 latency and 1.10 V?

Check the BIOS memory information or a tool like dmidecode; it should report 6400 MT/s, CAS latency 52, 1.10 V operation, and the full 384 GB capacity across all four 96 GB modules.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.