SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00499535BTC
Stokta
NEMIX RAM
NEMIX RAM 576GB 12x48GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H13SSW
A 576GB DDR5 ECC RDIMM kit of twelve 48GB modules running at 6400MHz CL52, registered for full-capacity stability on Supermicro H13SSW motherboards
- Capacity576GB (12 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 576 GB total capacity from twelve 48 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- ECC and registered design prevents data errors under load
- 288-pin RDIMM form factor built for Supermicro H13SSW
- 2Rx8 organisation allows full population at rated performance
Exact-Match Server Kit
This NEMIX RAM kit provides 576GB of DDR5 memory across twelve 48GB modules built for the Supermicro H13SSW motherboard. The 288-pin Registered ECC RDIMM format matches the board's required form factor and population rules so the system recognises the full capacity at the rated DDR5-6400 speed.
Enterprise Thermals and Power
Registered architecture reduces electrical load on the memory controller allowing all twelve slots to run fully populated at 1.1V without exceeding platform limits. ECC corrects single-bit errors in real time preventing silent data corruption and unplanned reboots in production workloads.
Capacity and Compatibility Upgrade
The kit replaces smaller or mixed-capacity DDR5 RDIMM sets when the workload demands the maximum supported density per slot. It is not suited for systems that require unbuffered UDIMMs, SODIMM form factors, or voltages other than 1.1V.
Öne çıkanlar
- 576 GB total capacity from twelve 48 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- ECC and registered design prevents data errors under load
- 288-pin RDIMM form factor built for Supermicro H13SSW
- 2Rx8 organisation allows full population at rated performance
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K12 |
| Capacity | 576GB (12 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 12X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Bu ürünle ilgili sorular
How do I install the 12 DDR5 RDIMMs on the Supermicro H13SSW, and which population step is often missed?
Populate all twelve 288-pin slots following the motherboard manual's exact DIMM order; the step most often missed is verifying the 2Rx8 rank layout and 1.10V setting in BIOS so the controller recognises the full 576 GB at 6400 MT/s.
What maintenance or replacement will the 576 GB DDR5 ECC RDIMM kit need later?
The modules have no heat spreaders and no moving parts, so routine maintenance is limited to keeping server airflow clean; replacement is only required if a DIMM fails, which the lifetime warranty covers.
What limit appears first when the 12x48 GB DDR5 6400 CL52 kit runs sustained workloads?
The registered buffer and 1.10V operation keep electrical load low, so the first practical limit is the motherboard's maximum supported capacity and slot count, not thermal throttling or signal degradation.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
