SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00501112BTC
Stokta
NEMIX RAM
NEMIX RAM 64GB DDR4 3200 2Rx4 ECC RDIMM Supermicro H11SSL-i memory upgrade
64GB DDR4 3200 ECC registered RDIMM module validated for Supermicro H11SSL-i EPYC motherboards
- Capacity64GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 64GB capacity expands server memory headroom for virtualization workloads
- DDR4 3200 speed with CL22 latency delivers responsive data throughput
- ECC registered design protects data integrity in mission-critical environments
- 2V operation reduces power draw across dense memory configurations
- Validated for Supermicro H11SSL-i with AMD EPYC platform compatibility
System-specific ECC RDIMM for Supermicro EPYC boards
This NEMIX RAM module delivers 64GB of DDR4 3200 registered memory with ECC and a 2Rx4 organisation. It operates at 1.2V with CL22 latency and fits the 288-pin RDIMM slots on the Supermicro H11SSL-i motherboard. The single-stick design simplifies capacity scaling in compatible server and workstation platforms.
Sustained-load behaviour with registered ECC
Registered buffering and on-die ECC keep data integrity intact during continuous multi-threaded workloads such as virtualisation, database serving or scientific compute. The 2Rx4 rank layout and CL22 timing maintain stable throughput at the rated 3200 MT/s without the error accumulation seen in unbuffered non-ECC alternatives under prolonged stress.
Upgrade path from lower-capacity or non-ECC DDR4
This module replaces smaller registered DIMMs or non-ECC sticks that limit total system memory or lack error correction. The jump is worth it when the workload demands more than 32GB per slot and requires the data protection of ECC for 24/7 operation. It is not suited for consumer desktop boards that cannot address registered memory.
Öne çıkanlar
- 64GB capacity expands server memory headroom for virtualization workloads
- DDR4 3200 speed with CL22 latency delivers responsive data throughput
- ECC registered design protects data integrity in mission-critical environments
- 2V operation reduces power draw across dense memory configurations
- Validated for Supermicro H11SSL-i with AMD EPYC platform compatibility
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-924K1 |
| Capacity | 64GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (1X64GB) DDR4 3200MHZ PC4-25600 2Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
Bu ürünle ilgili sorular
How much power does the 1.20V DDR4 3200 module draw when the server runs 24/7?
The module operates at 1.20V; actual power draw depends on the platform and workload, but the low voltage helps keep heat output modest in continuous operation.
What motherboard slot and chipset are required to install this 288-pin RDIMM?
It needs a DDR4 RDIMM slot on a Supermicro H11SSL-i or compatible EPYC-series board that supports 2Rx4 registered ECC memory at 3200 MT/s.
Can I mix this CL22 64GB stick with older DDR4 ECC RDIMMs of different capacity or speed?
Mixing is possible if the motherboard supports mixed ranks and speeds, but the system will run all modules at the lowest common speed and latency.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
