SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00499071BTC
Stokta
NEMIX RAM
NEMIX RAM 768GB (12x64GB) DDR5 4800 PC5-38400 CL40 2Rx4 1.1V ECC RDIMM memory upgrade
A 768 GB DDR5 4800 ECC registered server kit of twelve 64 GB 2Rx4 modules at 1.1 V CL40 for SuperMicro UP SuperServer SYS-111C-NR and SYS-521C-NR systems
- Capacity768GB (12 x 64GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 768 GB total capacity from twelve 64 GB modules
- DDR5 4800 speed with PC5-38400 bandwidth for server workloads
- ECC registered RDIMM design protects data integrity in critical systems
- 2Rx4 dual-rank organisation on 288-pin DDR5 form factor
- Low 1.1 V operation reduces power draw in dense configurations
SuperMicro DDR5 4800 ECC RDIMM kit
This 768GB kit contains twelve 64GB DDR5 4800 registered DIMMs with ECC and a CL40 latency. It is built for SuperMicro UP SuperServer SYS-111C-NR and SYS-521C-NR systems using the X13SEDW-F motherboard. The modules run at 1.1V and use a 2Rx4 organisation.
Upgrading from lower-capacity DDR5 RDIMMs
Replacing smaller registered modules with this 12 x 64GB configuration raises total system memory to 768GB. The jump is worthwhile when workloads such as virtualisation, large databases or scientific computing exceed the capacity of the existing kit.
Suited for SuperMicro servers needing maximum
This kit fits administrators populating all twelve slots on the X13SEDW-F platform with validated ECC RDIMMs. Builds that require unbuffered memory, non-ECC modules or speeds above 4800 MT/s should look at something else.
Öne çıkanlar
- 768 GB total capacity from twelve 64 GB modules
- DDR5 4800 speed with PC5-38400 bandwidth for server workloads
- ECC registered RDIMM design protects data integrity in critical systems
- 2Rx4 dual-rank organisation on 288-pin DDR5 form factor
- Low 1.1 V operation reduces power draw in dense configurations
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K12 |
| Capacity | 768GB (12 x 64GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 768GB (12X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Bu ürünle ilgili sorular
Does the 288-pin DDR5 RDIMM form factor fit the DIMM slots on the SuperMicro SYS-111C-NR and SYS-521C-NR servers?
Yes, the 288-pin DDR5 RDIMM modules match the registered DIMM slots on the X13SEDW-F motherboard used in those SuperMicro UP SuperServer systems.
What is the correct way to populate all 12 modules across the memory channels, and which step is often missed?
Install the 12 modules evenly across all memory channels following the motherboard manual's population order; the step often missed is confirming the BIOS recognises the full 768 GB capacity after seating every module.
When should the 12 registered ECC modules be reseated or replaced to maintain stability?
Reseat the modules if the server reports corrected ECC errors or fails POST after hardware changes; replace any module that continues to log uncorrectable errors after firmware updates.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
