SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00499179BTC
Stokta
NEMIX RAM
NEMIX RAM 768GB (6x128GB) DDR5 6400MHz CL52 2Rx4 1.1V ECC RDIMM Server Memory Upgrade
Six 128 GB DDR5 modules deliver 768 GB of ECC registered server memory at 6400 MHz with CL52 latency and 1.1 V operation
- Capacity768GB (6 x 128GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 768 GB total capacity across six 128 GB modules for dense server workloads
- DDR5 6400 MHz speed with CL52 latency for high-throughput data processing
- ECC registered RDIMM design detects and corrects memory errors in critical applications
- 1 V operating voltage reduces power draw in large-scale deployments
- Validated for Supermicro SuperServer SYS-822GS-NB3RT for guaranteed compatibility
Server-grade DDR5 ECC RDIMM kit
This 768 GB kit contains six 128 GB DDR5 6400 MHz CL52 2Rx4 registered DIMMs operating at 1.1 V. It is built for the Supermicro SuperServer SYS-822GS-NB3RT and other platforms that accept 288-pin DDR5 RDIMM modules with ECC. The registered design adds signal buffering for stable operation in multi-DIMM server configurations.
Upgrade from lower-capacity or slower DDR5 RDIMMs
Replacing smaller RDIMMs or slower DDR5 kits with this 6 x 128 GB set increases total memory bandwidth and rank density per channel. The jump is worth it when workloads exceed the capacity or throughput of existing modules and the motherboard supports the full 6400 MHz data rate with registered ECC DIMMs.
Handles large in-memory databases
The 768 GB total provides headroom for hundreds of virtual machines or multi-terabyte analytic datasets kept in RAM. Capacity runs out when the application working set grows beyond the installed 768 GB or when the platform's maximum supported memory per socket is lower than the kit size.
Öne çıkanlar
- 768 GB total capacity across six 128 GB modules for dense server workloads
- DDR5 6400 MHz speed with CL52 latency for high-throughput data processing
- ECC registered RDIMM design detects and corrects memory errors in critical applications
- 1 V operating voltage reduces power draw in large-scale deployments
- Validated for Supermicro SuperServer SYS-822GS-NB3RT for guaranteed compatibility
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K6 |
| Capacity | 768GB (6 x 128GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB (6 x 128GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Bu ürünle ilgili sorular
Will the 288-pin DDR5 RDIMM modules fit the memory slots on a Supermicro SuperServer SYS-822GS-NB3RT?
Yes, the 288-pin DDR5 RDIMM form factor matches the DIMM slots on the Supermicro SuperServer SYS-822GS-NB3RT, and the kit is validated for that platform.
What is the correct installation sequence for the six 128GB 2Rx4 modules to avoid a boot failure?
Populate all six slots following the motherboard’s channel population guide, ensuring each 2Rx4 registered module seats fully until the retention clips lock.
When should the registered ECC RDIMMs be replaced if correctable error counts start rising in the system logs?
Replace modules when the platform’s memory health monitor reports increasing correctable ECC errors or when a firmware health check flags a specific DIMM.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
