Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Two green DDR3 UDIMM modules, no heat spreaders, 240-pin edge connectors visible

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1333 PC3-10600 1.35V 240-Pin UDIMM Kit

SKU CH-512N-QN2C5

A dual-channel DDR3 kit supplying 8 GB at 1333 MHz with CL9 timing and 1.35 V low-voltage operation

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 8GB (2 x 4GB)

  • 8 GB dual-channel kit doubles bandwidth for smoother multitasking
  • DDR3 1333 PC3-10600 CL9 matches legacy board specs precisely
  • Low 1.35 V operation cuts heat and power draw
  • Major OEM Samsung Micron Hynix chips ensure rock-solid stability
  • 240-pin UDIMM drops straight into standard desktop slots

Kit Contents and Purpose

This NEMIX RAM kit provides 8 GB of DDR3 memory in two 4 GB modules. It uses the 240-pin UDIMM form factor and runs at 1333 MT/s with a CAS latency of CL9. The modules operate at 1.50 V and are unbuffered non-ECC, making them suitable for standard desktop motherboards that accept DDR3 DIMMs.

Who This Suits

The kit suits owners of older desktop systems that require DDR3 1333 memory for a straightforward capacity upgrade. Builders needing ECC error correction, registered modules, or higher-speed DDR3 variants should look at other parts. The lack of a heat spreader keeps the profile low for tight spaces.

Deciding Specification

The single specification that decides fit is the DDR3 1333 (PC3-10600) speed rating combined with 1.50 V unbuffered non-ECC operation. Your motherboard must explicitly support this speed and voltage at 240-pin UDIMM slots.

Öne çıkanlar

  • 8 GB dual-channel kit doubles bandwidth for smoother multitasking
  • DDR3 1333 PC3-10600 CL9 matches legacy board specs precisely
  • Low 1.35 V operation cuts heat and power draw
  • Major OEM Samsung Micron Hynix chips ensure rock-solid stability
  • 240-pin UDIMM drops straight into standard desktop slots

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD10600-428LK2
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Will this kit work in a system that only supports DDR3 at 1333 MHz?

Yes, the modules are rated for DDR3 1333 (PC3 10600) and will run at that speed when the motherboard supports it.

Does the 1.35 V rating on the product name match the module specifications?

The modules are specified at 1.50 V; they will operate at the standard DDR3 voltage of 1.50 V in your desktop.

Can I install these two 4 GB modules alongside existing memory?

You can add them if your board has free 240-pin DDR3 slots and supports non-ECC unbuffered UDIMMs; match the existing CAS latency for best stability.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.