SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00497696BTC
Stokta
NEMIX RAM
NEMIX RAM 8GB DDR3 1600 ECC UDIMM 1.35V 240-Pin Dell T620
An 8 GB DDR3 ECC UDIMM running at 1600 MHz with 1.35 V low-voltage operation for Dell PowerEdge T620 servers
- Capacity8GB
- SpeedDDR3 1600 (PC3 12800)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.35V
- 8GB DDR3 1600MHz ECC UDIMM expands server memory capacity
- ECC error correction protects data integrity in mission-critical workloads
- 35V low-voltage operation reduces power consumption and heat
- 240-pin unbuffered design installs directly in Dell PowerEdge T620
- 2Rx8 dual-rank configuration optimises memory bandwidth for demanding applications
NEMIX RAM 8GB DDR3 1600 ECC UDIMM
This 8GB DDR3 1600 module delivers ECC error correction for Dell PowerEdge T620 servers. It operates at 1.35V with CL11 latency and a 2Rx8 rank configuration. The unbuffered 240-pin UDIMM format fits compatible Dell systems requiring registered ECC memory.
DDR3 1600 PC3-12800 interface limits
The DDR3 1600 standard caps bandwidth at PC3-12800 speeds, so this module cannot exceed that throughput. ECC overhead uses part of the bus for parity, reducing usable bandwidth slightly. Systems locked to lower DDR3 speeds will downclock the module automatically.
Unbuffered 240-pin build with major OEM chips
Samsung, Micron or Hynix DRAM chips populate the green PCB without a heat spreader. The 240-pin edge connector seats directly into UDIMM slots on supported Dell boards. No thermal headroom exists for overclocking beyond the rated 1.35V specification.
Öne çıkanlar
- 8GB DDR3 1600MHz ECC UDIMM expands server memory capacity
- ECC error correction protects data integrity in mission-critical workloads
- 35V low-voltage operation reduces power consumption and heat
- 240-pin unbuffered design installs directly in Dell PowerEdge T620
- 2Rx8 dual-rank configuration optimises memory bandwidth for demanding applications
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR3 1600MHZ ECC Unbuffered UDIMM |
| Part Number | ME12800-828K1 |
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.35V |
| Compatible System | Dell |
| CAS Latency | CL11 |
| Heat Spreader | No |
| Type | 240-Pin DDR3 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR3 1600MHZ ECC UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 240-PIN ECC Unbuffered UDIMM |
Bu ürünle ilgili sorular
Should I choose this single 8GB module or look for a different capacity for my Dell PowerEdge T620?
This is an 8GB stick rated at DDR3 1600 (PC3 12800) with 2Rx8 organisation and 1.35V operation. It installs as one 240‑pin ECC UDIMM; add identical modules to reach the capacity your T620 configuration requires.
What does the 1600MHz rating deliver once the module is installed in a PowerEdge T620?
The module runs at DDR3 1600 with CL11 latency, providing PC3 12800 bandwidth. The server’s memory controller sets the final speed, so the DIMM will operate at up to 1600MHz if the platform supports that frequency.
Is the 240‑pin DDR3 ECC UDIMM interface compatible with my T620 and what limits apply?
Yes, the 240‑pin DDR3 ECC UDIMM matches the T620’s unbuffered ECC slots. The interface caps at the DDR3 1600 (PC3 12800) data rate and 1.35V; registered or higher‑voltage DIMMs are not interchangeable.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
