SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.0050101BTC
Stokta
NEMIX RAM
NEMIX RAM 96GB (2x48GB) DDR5 6400 ECC Registered RDIMM Supermicro H14SSF memory upgrade
96 GB DDR5 6400 ECC registered RDIMM kit (2 × 48 GB) validated for Supermicro H14SSF motherboards
- Capacity96GB (2 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB capacity from two 48 GB modules
- DDR5 6400 speed with CL52 latency
- Registered ECC architecture prevents silent data corruption
- 1 V operation matches server memory controller spec
- 288-pin RDIMM form factor fits Supermicro H14SSF
Exact-match DDR5-6400 kit
This NEMIX RAM kit delivers 96 GB as two 48 GB DDR5-6400 Registered ECC RDIMMs. Each module runs at 1.1 V with CL52 timing in a 2Rx8 organisation. The 288-pin form factor matches the Supermicro H14SSF motherboard's memory controller requirements for full-capacity recognition at rated speed.
Suited for populated Supermicro H14SSF servers
The Registered architecture offloads the memory controller so every slot can run fully populated at 96 GB while ECC corrects single-bit errors on the fly. Builders using UDIMM or SODIMM platforms, or boards that do not support Registered ECC DDR5, must choose a different module type.
96 GB headroom for virtualisation and databases
Two 48 GB ranks provide ample capacity for multi-tenant workloads, large in-memory datasets and container clusters. Workloads that scale beyond 96 GB per board will require additional DIMM slots or higher-density modules not included in this kit.
Öne çıkanlar
- 96 GB capacity from two 48 GB modules
- DDR5 6400 speed with CL52 latency
- Registered ECC architecture prevents silent data corruption
- 1 V operation matches server memory controller spec
- 288-pin RDIMM form factor fits Supermicro H14SSF
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 2X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Bu ürünle ilgili sorular
Does this 288-pin DDR5 RDIMM kit require my Supermicro H14SSF motherboard to support registered ECC memory at 1.1 V and CL52?
Yes, the motherboard must accept 288-pin registered ECC RDIMMs running at 1.1 V with a CAS latency of 52 to recognise the full 96 GB capacity at DDR5 6400 speed.
Will these two 48 GB 2Rx8 modules work if I keep older DDR5 RDIMMs of a different rank or voltage in the remaining slots?
Mixing ranks or voltages is not recommended; the board's memory controller expects identical 2Rx8 modules at 1.1 V in each populated channel for stable operation at the rated 6400 MT/s.
How can I confirm the kit is running at the specified 6400 MT/s with ECC active after installation?
Enter the BIOS or use a hardware-information utility to verify the memory frequency shows 6400 MT/s, the voltage reads 1.1 V, and ECC status reports enabled or active.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
