SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00501099BTC
Stokta
NEMIX RAM
NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 1.1V ECC Registered RDIMM memory upgrade
96GB DDR5-5600 ECC registered RDIMM at 1.1V CL46, validated for Supermicro H13DSG-O-CPU servers
- Capacity96GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 96 GB capacity supports large workloads
- DDR5 5600 speed transfers data at PC5-44800 rates
- CL46 latency and 1.10 V voltage match controller expectations
- 2Rx4 Registered ECC corrects single-bit errors on the fly
- 288-pin RDIMM form factor fits Supermicro H13DSG-O-CPU motherboard
Exact-match DDR5 RDIMM for Supermicro H13DSG-O-CPU
This 96GB DDR5-5600 Registered ECC module is built to the precise rank, voltage and timing the Supermicro H13DSG-O-CPU motherboard expects. The 2Rx4 organisation and CL46 latency let the memory controller recognise full capacity and run at rated speed without manual tuning. It is a server-grade RDIMM, not a UDIMM or SODIMM, so it fits only boards wired for 288-pin registered memory.
DDR5 registered ECC population limits
DDR5 Registered DIMMs offload the memory controller, allowing every slot to be populated at full capacity while ECC corrects single-bit errors on the fly. The motherboard's own population rules still decide how many modules can be installed and in which order; exceeding those rules will prevent the system from posting. No heat spreader is fitted, so airflow across the modules must follow the chassis design.
2Rx4 rank and 1.1 V decide compatibility
The single specification that determines whether this is the right part is the 2Rx4 rank combined with 1.1 V operating voltage. If the server's memory controller requires a different rank structure or voltage, the DIMMs will not train at 5600 MT/s or may not be recognised at all. Verify the manual's approved DIMM list before purchase.
Öne çıkanlar
- 96 GB capacity supports large workloads
- DDR5 5600 speed transfers data at PC5-44800 rates
- CL46 latency and 1.10 V voltage match controller expectations
- 2Rx4 Registered ECC corrects single-bit errors on the fly
- 288-pin RDIMM form factor fits Supermicro H13DSG-O-CPU motherboard
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K1 |
| Capacity | 96GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Bu ürünle ilgili sorular
Should I choose the 96GB DDR5-5600 CL46 2Rx4 registered ECC kit or a different capacity for my Supermicro H13DSG-O-CPU?
The 96GB kit matches the board's required 2Rx4 registered ECC layout and 1.10V voltage so the memory controller recognises full capacity at rated speed; consult your manual for approved population order before ordering a different size.
What does the 5600MHz PC5-44800 rating deliver once the modules are installed in the server?
The DDR5-5600 modules run at 5600 MT/s with CL46 latency, providing the peak bandwidth the platform expects when all slots are populated with registered DIMMs.
How does the 288-pin RDIMM interface and registered design affect real-world capacity limits?
The 288-pin registered form factor offloads the memory controller, allowing every slot to run fully populated at 96GB per module without signal degradation.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
