Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 192GB kit

NEMIX RAM

NEMIX RAM DDR5 5600 192GB (2x96GB) ECC RDIMM CL46 1.1V Supermicro X14SRG-TF memory upgrade

SKU CH-BW17-H47Q4

A 192GB DDR5 ECC registered DIMM kit (2x96GB) at 5600MHz CL46, 1.1V, validated for the Supermicro X14SRG-TF motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

4 yapılandırma daha gösterin
  • 192GB capacity for high-density workloads using two 96GB modules
  • DDR5 5600 speed matches the Supermicro X14SRG-TF memory controller specification
  • ECC registered design corrects single-bit errors and offloads the controller
  • 1V operation at CL46 timing meets the board's exact voltage and latency requirements
  • 288-pin RDIMM form factor ensures physical and electrical fit in every supported slot

Exact-match DDR5 RDIMM kit for Supermicro X14SRG-TF

This 192GB kit delivers two 96GB registered ECC modules built to the board's native DDR5 5600 specification. The 2Rx4 organization, 1.1V operation and CL46 timing match the memory controller's expectations so the full capacity is recognised at rated speed. It is intended for administrators upgrading that specific Supermicro platform.

Registered DDR5 5600 interface limits

The 288-pin RDIMM form factor and registered architecture are required by the X14SRG-TF; UDIMM or SODIMM modules will not fit or function. DDR5 5600 (PC5-44800) sets the maximum data rate the memory controller supports, so the kit cannot run faster than this standard. Population rules in the motherboard manual dictate which slots must be filled first for stable operation.

192GB capacity with ECC headroom

Two 96GB ranks provide 192GB of error-correcting memory, allowing large virtualisation workloads, in-memory databases and multi-tenant containers to run without swapping. Registered buffering lets every slot stay populated at this density while ECC corrects single-bit errors on the fly. Systems needing more than 192GB or non-ECC consumer modules cannot use this kit.

Öne çıkanlar

  • 192GB capacity for high-density workloads using two 96GB modules
  • DDR5 5600 speed matches the Supermicro X14SRG-TF memory controller specification
  • ECC registered design corrects single-bit errors and offloads the controller
  • 1V operation at CL46 timing meets the board's exact voltage and latency requirements
  • 288-pin RDIMM form factor ensures physical and electrical fit in every supported slot

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Should I choose this 192 GB kit or a smaller capacity for my Supermicro X14SRG-TF?

This kit provides two 96 GB RDIMMs for 192 GB total. The X14SRG-TF manual lists the maximum supported capacity per slot and the required population order; choose a smaller kit only if your CPU or BIOS limits the total memory below 192 GB.

What does DDR5-5600 CL46 mean for real-world server throughput?

The modules run at 5600 MT/s with a CAS latency of 46 cycles. Registered buffering lets the memory controller drive every slot at that speed when fully populated, while ECC corrects single-bit errors to prevent silent data corruption.

Is the 288-pin RDIMM interface on this kit the only DDR5 form factor that fits the X14SRG-TF?

Yes. The board requires 288-pin Registered DDR5 RDIMMs; unbuffered UDIMMs or SODIMMs are physically and electrically incompatible and will not work.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.