NEMIX RAM
NEMIX RAM DDR5 5600 ECC RDIMM 1.5TB 12x128GB Supermicro H14SST-G memory upgrade
1.5 TB DDR5-5600 registered ECC kit with twelve 128 GB modules at 1.1 V CL46 for Supermicro H14SST-G
- Capacity1.5TB (12 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 5TB total capacity from twelve 128GB modules
- DDR5 5600 speed with CL46 latency at 1.1V
- ECC and registered design prevents data errors
- 288-pin RDIMM form factor fits Supermicro H14SST-G
- Lifetime replacement warranty with US-based technical support
1.5TB DDR5 ECC RDIMM Kit
This NEMIX RAM kit provides 1.5TB of DDR5 memory across twelve 128GB Registered ECC RDIMM modules. It is built for the Supermicro H14SST-G motherboard and operates at DDR5 5600 with CL46 latency and 1.1V voltage. The 2Rx4 registered design allows full population of all slots at rated speed.
Suited for full-capacity server upgrades
This kit suits administrators upgrading a compatible Supermicro H14SST-G system to its maximum supported memory using matched, registered ECC modules. It is not for systems that require unbuffered UDIMMs or SODIMM form factors. Builders needing lower capacities or non-ECC memory should look elsewhere.
DDR5 5600 Registered ECC specification
The decisive specification is the DDR5 5600 (PC5-44800) registered ECC RDIMM standard with 2Rx4 organisation and 1.1V operation. The motherboard must support this exact speed, voltage, rank structure and registered buffer type. Verify the H14SST-G manual for approved population rules before installation.
Öne çıkanlar
- 5TB total capacity from twelve 128GB modules
- DDR5 5600 speed with CL46 latency at 1.1V
- ECC and registered design prevents data errors
- 288-pin RDIMM form factor fits Supermicro H14SST-G
- Lifetime replacement warranty with US-based technical support
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-724K12 |
| Capacity | 1.5TB (12 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 12X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Bu ürünle ilgili sorular
Will these 288-pin DDR5 RDIMMs fit the memory slots on my Supermicro H14SST-G motherboard?
Yes, the kit is verified for the Supermicro H14SST-G and uses the 288-pin RDIMM form factor that board requires.
What is the correct order to populate all 12 modules so the server recognises the full 1.5 TB?
Follow the motherboard manual's population sequence; the kit matches the board's registered ECC requirements but the exact slot order is model-specific.
Do these Samsung, Micron or Hynix based modules need any firmware updates or periodic reseating over their service life?
No firmware updates are required for the memory itself; ECC corrects single-bit errors automatically and registered buffering maintains signal integrity without reseating.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



