SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00496341BTC
Stokta
NEMIX RAM
NEMIX RAM DDR5 576GB (12x48GB) 5600MHz CL46 ECC Registered RDIMM Supermicro H14SST-G
A 576 GB DDR5 server memory kit with twelve 48 GB registered ECC RDIMMs at 5600 MHz CL46, validated for the Supermicro H14SST-G motherboard
- Capacity576GB (12 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 576 GB total capacity from 12 matched 48 GB modules for high-density server workloads
- DDR5 5600 MHz speed delivers rated bandwidth for memory-intensive applications
- CL46 CAS latency and 1.1 V operation tuned for stable registered ECC performance
- 2Rx8 registered RDIMM architecture offloads the controller for full-slot population reliability
- Verified fit for Supermicro H14SST-G motherboard with 288-pin DDR5 RDIMM form factor
576GB DDR5 ECC RDIMM Kit for Supermicro H14SST-G
This 12-module kit delivers 576GB of DDR5 5600 registered ECC memory built for the Supermicro H14SST-G motherboard. Each 48GB 2Rx8 DIMM runs at 1.1V with CL46 latency. The 288-pin RDIMM form factor matches the board's registered-memory requirement exactly.
Suits fully populated servers; not for UDIMM boards
Registered ECC RDIMMs are required for this platform, so the kit suits administrators filling all 12 slots on a supported Supermicro H14SST-G system. Builders whose boards accept only unbuffered UDIMMs or SODIMMs cannot use these modules.
12 x 48GB 2Rx8 Registered ECC at DDR5 5600
The decisive specification is the 12-piece 2Rx8 registered ECC configuration at DDR5 5600. The memory controller must support this exact rank structure, voltage, and speed to recognise the full 576GB capacity and operate at the rated frequency.
Öne çıkanlar
- 576 GB total capacity from 12 matched 48 GB modules for high-density server workloads
- DDR5 5600 MHz speed delivers rated bandwidth for memory-intensive applications
- CL46 CAS latency and 1.1 V operation tuned for stable registered ECC performance
- 2Rx8 registered RDIMM architecture offloads the controller for full-slot population reliability
- Verified fit for Supermicro H14SST-G motherboard with 288-pin DDR5 RDIMM form factor
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K12 |
| Capacity | 576GB (12 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 12X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Bu ürünle ilgili sorular
Does the Supermicro H14SST-G need all 12 DDR5 RDIMM slots filled to run this 576GB kit at 5600MHz?
The kit contains 12 modules of 48GB each. The H14SST-G motherboard dictates the supported population order and maximum capacity per slot. Consult the board manual for the exact DIMM sequence required to recognise the full 576GB at DDR5-5600.
Can I mix these registered ECC RDIMMs with any existing unbuffered DDR5 UDIMMs already installed in the server?
No. Registered RDIMMs and unbuffered UDIMMs use different signalling and cannot operate together on the same memory controller. All slots must use the same registered ECC DDR5 type for the system to boot and run stably.
After installation, how do I confirm the kit is running at DDR5-5600 CL46 with ECC active?
Enter the system BIOS or UEFI and open the memory information screen. It should report 576GB total, 5600MT/s speed, CL46 latency, 1.1V voltage, and ECC enabled for each of the 12 installed RDIMMs.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
