SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.0050133BTC
Stokta
NEMIX RAM
NEMIX RAM DDR5 6400 ECC RDIMM 576GB (6×96GB) CL52 1.1V 2Rx4 Supermicro H14SSL-NT memory upgrade
A 576GB DDR5-6400 ECC RDIMM kit of six 96GB modules at CL52, 1.1V, 2Rx4, verified for the Supermicro H14SSL-NT motherboard
- Capacity576GB (6 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 576 GB total capacity from six 96 GB modules for maximum server density
- DDR5-6400 speed with CL52 latency and 1.1 V operation for efficient throughput
- Registered ECC RDIMM design corrects single-bit errors and offloads the memory controller
- 2Rx4 dual-rank organisation enables full-population stability on every slot
- Verified 288-pin fitment for the Supermicro H14SSL-NT motherboard
Exact-fit 576 GB server kit
This NEMIX RAM kit delivers 576 GB across six 96 GB DDR5-6400 registered ECC RDIMMs built for the Supermicro H14SSL-NT motherboard. Each module runs at 1.10 V with CL52 timing and a 2Rx4 organisation that matches the board's memory controller requirements. The 288-pin form factor ensures correct physical fit and electrical signalling.
Sustained-load behaviour
Registered buffering reduces electrical load on the memory controller so all six slots can operate at the rated 6400 MT/s without down-clocking. ECC corrects single-bit errors in real time, preventing silent data corruption during long compute runs. The 2Rx4 rank structure supports full-capacity population across every channel.
Thermals and power
Modules operate at the standard DDR5 1.10 V with no integrated heat spreader, relying on chassis airflow for cooling. Lower voltage reduces per-DIMM power draw compared with higher-voltage DDR5 variants. The registered design adds minimal latency while keeping signal integrity stable under continuous server workloads.
Öne çıkanlar
- 576 GB total capacity from six 96 GB modules for maximum server density
- DDR5-6400 speed with CL52 latency and 1.1 V operation for efficient throughput
- Registered ECC RDIMM design corrects single-bit errors and offloads the memory controller
- 2Rx4 dual-rank organisation enables full-population stability on every slot
- Verified 288-pin fitment for the Supermicro H14SSL-NT motherboard
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Bu ürünle ilgili sorular
How much heat and power will the 1.10V DDR5 6400 kit draw when the server runs continuously?
Each 96GB module operates at 1.10V with no heat spreader; the registered DDR5 design reduces electrical load on the memory controller so the fully populated kit stays within standard DDR5 thermal limits during 24/7 operation.
What motherboard slot and population rules must my Supermicro H14SSL-NT already have to accept this 6×96GB RDIMM kit?
The board needs six 288-pin DDR5 RDIMM slots and must support 2Rx4 registered ECC modules at 6400 MT/s; consult the H14SSL-NT manual for the exact population order before installing all 576GB.
Will the CL52 2Rx4 registered ECC modules work reliably alongside any older DDR5 RDIMMs I keep in the same H14SSL-NT?
Mixing ranks, voltages or timings is not supported; the kit is validated as a matched 6×96GB set at 1.10V CL52, so all slots should be populated with these identical modules for guaranteed stability.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
