Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Six green DDR5 RDIMM modules with black chips and gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM MR44800-724K6 768GB 6x128GB DDR5 5600 CL46 RDIMM memory upgrade

SKU CH-C8W0-SQX41

A 768 GB DDR5-5600 RDIMM kit of six 128 GB modules with ECC, registered buffering, CL46 timing and 1.1 V operation, validated for the GIGABYTE MS34-CP0 motherboard

  • Capacity768GB (6 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 768GB 6X128GB

18 yapılandırma daha gösterin
  • 768 GB total capacity from six 128 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on compatible platforms
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 2Rx4 rank matches the motherboard's exact electrical requirements
  • Verified fit for GIGABYTE MS34-CP0 with 288-pin RDIMM form factor and population rules

Exact-match DDR5 server kit

This 768GB kit delivers six 128GB DDR5 5600 RDIMM modules built to the exact rank, voltage and timing the memory controller expects. It targets administrators upgrading a GIGABYTE MS34-CP0 motherboard where full-capacity recognition and rated-speed operation are required.

Sustained-load behaviour

Registered buffering offloads the memory controller so every slot runs fully populated at 5600 MT/s without throttling, while ECC corrects single-bit errors on the fly to prevent silent data corruption during continuous workloads. The 1.1V operating voltage keeps power draw stable across extended duty cycles.

Build and connectors

Each 288-pin RDIMM uses a 2Rx4 organisation with major OEM DRAM chips and no heat spreader, fitting the board's standard DIMM slots and population rules. The registered form factor is mandatory for this platform; UDIMM or SODIMM modules will not function.

Öne çıkanlar

  • 768 GB total capacity from six 128 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on compatible platforms
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 2Rx4 rank matches the motherboard's exact electrical requirements
  • Verified fit for GIGABYTE MS34-CP0 with 288-pin RDIMM form factor and population rules

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K6
Capacity768GB (6 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 6X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How much power does the 1.1 V DDR5 5600 RDIMM kit draw when the server runs all day?

Each module operates at 1.10 V; total power depends on the GIGABYTE MS34-CP0 memory controller and population, so consult the motherboard manual for exact idle and load figures.

What must the buyer already own for this 6 x 128 GB kit to function?

A GIGABYTE MS34-CP0 motherboard with six free 288-pin DDR5 RDIMM slots that support 2Rx4 registered ECC modules at DDR5 5600 (PC5-44800) and a compatible CPU.

How does this 768 GB registered ECC kit behave alongside other DDR5 5600 RDIMMs already installed?

The board will train all populated slots to the lowest common speed and timing; matching rank (2Rx4), voltage (1.10 V) and CAS latency (CL46) helps maintain stability at full DDR5 5600.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.