Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM MR51200-328K8 256GB 8x32GB DDR5 6400 CL52 1.1V ECC Registered RDIMM memory upgrade

SKU CH-2QR5-0Q2K5

256 GB DDR5 server kit with eight 32 GB registered ECC RDIMMs at 6400 MT/s, CL52 and 1.1 V, validated for the Gigabyte MS34-CP0 motherboard

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

18 yapılandırma daha gösterin
  • 256 GB total capacity across eight 32 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth for demanding workloads
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1 V operation matches the motherboard's memory controller specification exactly
  • Verified fit for GIGABYTE MS34-CP0 motherboard with 288-pin RDIMM form factor

Exact-Match DDR5 Kit for GIGABYTE MS34-CP0

This 256GB kit delivers eight 32GB DDR5-6400 Registered ECC RDIMMs built to the precise rank, voltage and timing the MS34-CP0 memory controller expects. The modules operate at 1.1V with CL52 latency and a 2Rx8 organization, allowing full-capacity recognition at rated speed without manual tuning. It targets administrators upgrading compatible GIGABYTE server platforms that require Registered DIMMs.

Sustained Load Stability

Registered architecture buffers address and command signals so every slot remains stable when all eight DIMMs are populated at 6400 MT/s. ECC circuitry detects and corrects single-bit errors on the fly, preventing silent data corruption during extended compute or virtualization workloads. The 1.10V operating voltage keeps power draw consistent across the fully populated array.

Installation Constraints

The 288-pin RDIMM form factor fits only slots wired for Registered memory; UDIMM or SODIMM slots will not accept these modules. Population order and maximum supported capacity vary by BIOS revision, so the system or motherboard manual must be consulted before installation. No heat spreaders are present, leaving the DRAM exposed in tight chassis airflow paths. Buyers needing unbuffered DIMMs or a smaller capacity kit cannot use this product.

Öne çıkanlar

  • 256 GB total capacity across eight 32 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth for demanding workloads
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1 V operation matches the motherboard's memory controller specification exactly
  • Verified fit for GIGABYTE MS34-CP0 motherboard with 288-pin RDIMM form factor

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How much power does the 256GB DDR5 6400 kit draw at its rated 1.10V when the server runs continuously?

Each 32GB module operates at 1.10V, so the full 8-module kit runs at that voltage; total power draw depends on the platform's memory-controller load and is not fixed by the modules alone.

What motherboard slot type and population rules must my GIGABYTE MS34-CP0 already support for this 8x32GB RDIMM kit to work?

The board needs 288-pin DDR5 RDIMM slots and must allow eight 2Rx8 registered DIMMs populated per its memory-population guide; the kit matches the exact rank, voltage and timing the controller expects.

Will these CL52 2Rx8 registered ECC modules run at DDR5 6400 alongside older DDR5 RDIMMs that have different latencies or ranks?

The memory controller sets a common speed and timing for all populated slots; mixing ranks or CAS latencies typically forces the slowest common settings, so identical modules are recommended for full rated performance.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.