Orico
Orico ORICO-IG740PRO 4TB NVMe internal SSD with Heatsink
4 TB M.2 2280 NVMe SSD with heatsink, PCIe 4.0 x4, up to 7100 MB/s read and 1128K IOPS, 600 TBW endurance, 1.5 million-hour MTBF, AES encryption and power-loss protection
- Device TypeInternal Solid State Drive (SSD)
- Form FactorM.2 2280
- Capacity512GB/1TB/2TB/4TB/8TB
- InterfacePCI-Express 4.0 x4
- FeaturesORICO Industrial SSD M.2 NVMe SSD, PCIe 4.0 Drive with 7100M
- Industrial-grade reliability backed by 1.5 million-hour MTBF
- Exceptional transfer speeds up to 7100 MB/s read
- Advanced data security with AES encryption and power-loss protection
- Versatile compatibility for PCs, PS5, VR and edge computing
- High-quality NAND endurance rated at 600 TBW
Industrial-grade 4 TB NVMe SSD
The Orico ORICO-IG740PRO is a 4 TB internal solid-state drive built on the M.2 2280 form factor with a PCIe 4.0 x4 interface and NVMe 2.0 protocol. It is rated for sequential reads up to 7100 MB/s and 1128K IOPS, with an MTBF of 1.5 million hours and 600 TBW endurance. An integrated copper heatsink is included for thermal management.
Verify M.2 slot and PCIe generation
Confirm that your motherboard or laptop provides an M.2 2280 slot wired for PCIe 4.0 x4 to reach the advertised 7100 MB/s read speed. The drive will operate in PCIe 3.0 slots at reduced throughput. Ensure the BIOS recognises NVMe boot devices if you plan to use it as a system drive, and check that the physical slot length accommodates the 2280 form factor with the attached heatsink.
Fits desktops, laptops and PS5
The single-sided M.2 2280 design with pre-fitted heatsink suits standard desktop boards, compatible laptops and the PlayStation 5 expansion slot without extra brackets. Power-loss protection, LDPC ECC and AES encryption safeguard data during unexpected shutdowns. The PCIe 4.0 x4 link leaves other PCIe lanes free for graphics cards or additional storage, while the copper heatsink dissipates heat without relying on case airflow.
Öne çıkanlar
- Industrial-grade reliability backed by 1.5 million-hour MTBF
- Exceptional transfer speeds up to 7100 MB/s read
- Advanced data security with AES encryption and power-loss protection
- Versatile compatibility for PCs, PS5, VR and edge computing
- High-quality NAND endurance rated at 600 TBW
Teknik özellikler
| Brand | ORICO |
|---|---|
| Series | ORICO-IG740PRO |
| Model | ORICO-IG740PRO |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280 |
| Capacity | 512GB/1TB/2TB/4TB/8TB |
| Interface | PCI-Express 4.0 x4 |
| Features | ORICO Industrial SSD M.2 NVMe SSD, PCIe 4.0 Drive with 7100MB/s Read Speed, Advanced Data Security and Innovative Heatsink |
Bu ürünle ilgili sorular
Does the box include a heatsink or must I buy one separately?
The drive ships with an integrated heatsink already attached, so no separate cooler is required.
Which capacity should I choose for the 7100 MB/s read speed?
The 7100 MB/s sequential read figure applies to the 1 TB model; other capacities may differ.
What does the 7100 MB/s figure mean once the drive is installed in my PC?
It is the maximum sequential read throughput over the PCIe 4.0 x4 link under ideal conditions.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM



