BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00279855BTC
Stokta
OWC
OWC 16GB DDR4 2666 CL19 ECC VLP UDIMM 2Rx8 1.2V 288-pin 2E6V42R816GB
16 GB DDR4 2666 CL19 ECC VLP UDIMM for Supermicro SuperWorkstation 5039 series and SuperServer 5019 models
- Capacity16GB
- Type288-Pin DDR4 ECC VLP UDIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.2V
- ECCYes
- 16 GB capacity lets you run more apps simultaneously
- DDR4 2666 speed with CL19 latency delivers responsive data access
- ECC protection detects and corrects single-bit errors for data integrity
- VLP 288-pin unbuffered design fits Supermicro SuperWorkstation 5039 and SuperServer 5019 systems
- JEDEC-standard 1.2 V operation ensures warranty-safe upgrade
OWC 16GB DDR4 2666 ECC VLP UDIMM
This 16GB DDR4 2666 module adds ECC protection to compatible Supermicro SuperWorkstation and SuperServer systems. It runs at PC4-21300 speed with CL19 latency and operates at 1.2V in a very low-profile unbuffered DIMM format. The single 2Rx8 rank design fits space-constrained mid-tower chassis.
Capacity and headroom for ECC workloads
The 16GB capacity supports larger datasets and more concurrent virtual machines than 8GB configurations. JEDEC-standard DDR4 2666 bandwidth handles typical workstation memory pressure, while ECC corrects single-bit errors that can corrupt calculations. The module reaches its limit when applications demand more than 16GB per slot or require registered buffering for higher densities.
Upgrade path for Supermicro 5039 and 5019 systems
This module replaces lower-capacity DDR4 ECC UDIMMs in Supermicro SuperWorkstation 5039A-iL, 5039C-I, 5039C-T and SuperServer 5019S-WR, 5019S-MN4 platforms. The jump is worthwhile when current memory falls short of workload requirements or when mixing capacities degrades channel performance. Systems already populated with matched 16GB modules gain no benefit from this single-stick addition.
Öne çıkanlar
- 16 GB capacity lets you run more apps simultaneously
- DDR4 2666 speed with CL19 latency delivers responsive data access
- ECC protection detects and corrects single-bit errors for data integrity
- VLP 288-pin unbuffered design fits Supermicro SuperWorkstation 5039 and SuperServer 5019 systems
- JEDEC-standard 1.2 V operation ensures warranty-safe upgrade
Teknik özellikler
| Brand | OWC |
|---|---|
| Part Number | 2E6V42R816GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 ECC VLP UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperWorkstation Mid-Tower 5039A-iL Supermicro SuperWorkstation Mid-Tower 5039C-I Supermicro SuperWorkstation Mid-Tower 5039C-T Supermicro SuperServer 5019S-WR Supermicro SuperServer 5019S-MN4 |
Bu ürünle ilgili sorular
Will this 288-pin DDR4 2666 CL19 ECC VLP UDIMM run alongside my existing 2Rx8 modules in a Supermicro 5039A-iL?
Yes — the module is tested for the Supermicro SuperWorkstation 5039A-iL and matches the DDR4 2666 PC4-21300 CL19 2Rx8 1.2 V specification, so it will operate with identical DIMMs in that system.
How can I verify the 16 GB stick is recognised at 2666 MT/s with ECC active after installation?
Enter the system BIOS or UEFI on the Supermicro 5039 series and confirm the memory shows 16 GB, 2666 MT/s, CL19 timing and ECC enabled.
Does the 2E6V42R816GB package include only the single 16 GB VLP UDIMM or are any tools or cables supplied?
The upgrade consists of one 16 GB DDR4 2666 CL19 2Rx8 1.2 V VLP ECC unbuffered DIMM; no tools, cables or additional hardware are included.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
