BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00277131BTC
Stokta
OWC
OWC 2L1D44R464GB 64GB DDR4 2133 PC4-17000 CL15 4Rx4 288-pin 1.2V ECC Load Reduced DIMM memory upgrade
64GB DDR4 2133 ECC load-reduced DIMM for Fujitsu PRIMERGY RX2530 M1-L, RX2540 M1, RX2560 M1 and RX4770 M2 servers
- Capacity64GB
- Type288-Pin DDR4 ECC LRDIMM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.2V
- ECCYes
- Maximise server capacity with a single 64GB module
- ECC load-reduced design protects data integrity in critical workloads
- DDR4 2133 CL15 at 1.2V balances speed and power efficiency
- Validated for Fujitsu PRIMERGY RX2530 M1-L, RX2540 M1, RX2560 M1 and RX4770 M2
- Replaces Fujitsu part numbers S26361F3843E618, S26361-F3844-E518, S26361-F3844-E618, S26361-F3844-L518 and S26361F3843E518
Server memory module
This OWC 64GB DDR4 2133 PC4-17000 CL15 ECC Load Reduced DIMM is built for Fujitsu PRIMERGY RX2530 M1-L, RX2540 M1, RX2560 M1 and RX4770 M2 servers. It delivers 64GB capacity in a single 288-pin module running at 1.2V with 4Rx4 organisation. The part replaces Fujitsu numbers S26361F3843E618, S26361-F3844-E518, S26361-F3844-E618, S26361-F3844-L518 and S26361F3843E518.
Compatibility check
Verify that your system requires DDR4 ECC Load Reduced memory and not unbuffered or standard registered DIMMs. The module cannot be mixed with other memory types and is not suitable for standard desktop computers. Confirm the server model matches the supported PRIMERGY list before ordering.
Thermals and power
The module operates at 1.2V without a heat spreader, relying on chassis airflow for cooling. Load Reduced architecture reduces electrical load on the memory bus, helping keep power draw modest in normal server workloads. No moving parts are present, so the module adds no acoustic noise.
Öne çıkanlar
- Maximise server capacity with a single 64GB module
- ECC load-reduced design protects data integrity in critical workloads
- DDR4 2133 CL15 at 1.2V balances speed and power efficiency
- Validated for Fujitsu PRIMERGY RX2530 M1-L, RX2540 M1, RX2560 M1 and RX4770 M2
- Replaces Fujitsu part numbers S26361F3843E618, S26361-F3844-E518, S26361-F3844-E618, S26361-F3844-L518 and S26361F3843E518
Teknik özellikler
| Brand | OWC |
|---|---|
| Part Number | 2L1D44R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | Fujitsu PRIMERGY RX2530 M1-L Fujitsu PRIMERGY RX2540 M1 Fujitsu PRIMERGY RX2540 M1 Fujitsu PRIMERGY RX2560 M1 Fujitsu PRIMERGY RX4770 M2 |
Bu ürünle ilgili sorular
Does the 64 GB module ship alone or with extra hardware?
The module is supplied as a single 64 GB DDR4 2133 PC4-17000 CL15 4Rx4 288-pin 1.2 V ECC Load Reduced DIMM; no brackets, cables or additional parts are included.
Should I pick the 64 GB LRDIMM or a smaller registered DIMM for my PRIMERGY?
Choose this 64 GB Load Reduced DIMM when your PRIMERGY RX2530 M1-L, RX2540 M1, RX2560 M1 or RX4770 M2 requires LRDIMM technology; it cannot be mixed with registered or unbuffered modules.
What does the PC4-17000 rating deliver in a live server?
PC4-17000 indicates a 2133 MT/s data rate at CL15 latency, giving the rated bandwidth when the module runs at 1.2 V in a compatible PRIMERGY system.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
