Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap

OWC

OWC 32GB (2x16GB) DDR5 5200 PC5-41600 CL42 1Rx8 ECC Registered RDIMM server RAM

SKU CH-Q85T-YQ3EG

A 32 GB dual-channel DDR5 ECC registered RDIMM kit running at 5200 MT/s with CL42 latency for compatible workstations and servers

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 5200 (PC5 41600)
  • CAS LatencyCL42
  • Voltage1.1V
  • ECCYes

Rank 1Rx8

  • Dual-channel 32 GB kit expands server capacity
  • DDR5 5200 MT/s speed accelerates data-intensive workloads
  • CL42 latency at 1.1 V balances responsiveness with efficiency
  • ECC registered design detects and corrects memory errors
  • JEDEC and RoHS compliant for warranty-safe upgrades

Server-grade DDR5 ECC RDIMM kit

This OWC kit supplies 32 GB of DDR5 memory as two 16 GB registered DIMMs. Each module runs at 5200 MT/s with CL42 latency at 1.1 V and includes on-die ECC. The 288-pin RDIMM form factor is built for workstations, servers and NAS platforms that require registered memory.

Replaces unbuffered or slower registered modules

The upgrade is worthwhile when a system supports DDR5 RDIMM and needs error-correcting capacity for virtualisation, databases or ZFS workloads. Moving from single-channel or lower-speed registered memory to this dual-channel kit adds bandwidth and capacity without changing voltage or form factor.

Verify platform accepts DDR5 RDIMM before ordering

Confirm the motherboard or server chassis lists DDR5 5200 registered DIMM support and cannot mix with unbuffered or load-reduced modules. Check that the CPU and chipset provide enough memory channels for the two-module kit and that the BIOS is current enough for 1Rx8 density.

Öne çıkanlar

  • Dual-channel 32 GB kit expands server capacity
  • DDR5 5200 MT/s speed accelerates data-intensive workloads
  • CL42 latency at 1.1 V balances responsiveness with efficiency
  • ECC registered design detects and corrects memory errors
  • JEDEC and RoHS compliant for warranty-safe upgrades

Teknik özellikler

BrandOWC
Part Number5R2D51R8032P
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 5200 (PC5 41600)
CAS LatencyCL42
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

What slot and pin count does this 288-pin DDR5 RDIMM require on the motherboard?

It installs in a standard 288-pin DDR5 RDIMM slot keyed for registered ECC modules.

Which sequence should I follow when populating the two 1Rx8 modules for dual-channel operation?

Insert the first module into the primary channel slot indicated by the board manual, then add the second into the matching channel slot; mixing registered with unbuffered or load-reduced DIMMs will prevent boot.

When should I consider replacing these 1.1V ECC registered modules?

Replace them if the system logs correctable ECC errors that climb steadily, if memory diagnostics report uncorrectable failures, or if a firmware update requires a different rank or speed configuration.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.