Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Green circuit board with gold edge connectors and black memory chips

OWC

OWC 8GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM for Supermicro SuperBlade 7126T 7226T

SKU CH-8K42-MCJ26

An 8 GB DDR3 ECC registered DIMM running at 1333 MHz with CL9 latency for Supermicro SuperBlade 7126T and 7226T servers

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC registered design protects server data integrity
  • 8GB DDR3 1333 module upgrades SuperBlade 7126T and 7226T systems
  • CL9 latency and 1.5V voltage match JEDEC DDR3 10600 spec
  • 2Rx4 registered DIMM replaces six Supermicro part numbers
  • 240-pin form factor fits blade server memory slots

Targeted Server Upgrade

This 8GB DDR3 ECC Registered RDIMM is built for Supermicro SuperBlade 7126T and 7226T systems. It delivers 1333MHz speed with CL9 latency at 1.5V for compatible server platforms. The module uses a 2Rx4 organisation and 240-pin form factor. It is not compatible with standard desktop computers or unbuffered memory configurations.

Sustained Load Behaviour

ECC error correction maintains data integrity during continuous operation in multi-socket blade environments. Registered buffering reduces electrical load on the memory controller when all slots are populated. The 1.5V JEDEC standard voltage supports stable performance across extended duty cycles. Mixing with unbuffered DIMMs will prevent the system from functioning.

DDR3 Interface Limits

The DDR3 1333 interface caps bandwidth at PC3-10600 rates regardless of processor capability. Registered design adds one clock cycle of latency compared to unbuffered modules. Capacity is limited to this single 8GB rank configuration per slot. Supermicro part numbers MEMDR380LCL01ER13 through MEMDR380LSL06ER13 are direct replacements.

Öne çıkanlar

  • ECC registered design protects server data integrity
  • 8GB DDR3 1333 module upgrades SuperBlade 7126T and 7226T systems
  • CL9 latency and 1.5V voltage match JEDEC DDR3 10600 spec
  • 2Rx4 registered DIMM replaces six Supermicro part numbers
  • 240-pin form factor fits blade server memory slots

Teknik özellikler

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 7126T Series
Supermicro SuperBlade 7226T Series

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How much power does the 1.5V DDR3 1333 module draw when the SuperBlade runs continuously?

The module operates at the standard DDR3 1.5V supply; actual power draw depends on the server workload and the SuperBlade chassis power management.

What must the SuperBlade 7126T or 7226T already have installed for this 2Rx4 registered ECC DIMM to function?

The blade must support 240-pin DDR3 registered ECC memory and have an available DIMM slot; mixing with unbuffered DIMMs is not supported.

Can this PC3-10600 CL9 RDIMM share a channel with older Supermicro memory parts such as MEMDR380LCL01ER13?

OWC recommends identical capacity, speed and manufacturer for optimal performance; mixing different part numbers may work but is not guaranteed.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.