Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Silver 3.5-inch enterprise hard drive with SAS connector and label showing 8TB capacity

Seagate

Seagate Exos 7E10 ST8000NM018B 8TB 7200 RPM 256MB SAS 12Gb/s 3.5" internal hard drive

SKU CH-8CH1-GT995 MPN ST8000NM018B

An 8TB enterprise hard drive with 7200 RPM, 256MB cache and SAS 12Gb/s interface for 24x7 bulk data storage

  • InterfaceSAS 12Gb/s
  • Capacity8TB
  • NAND Flash Memory TypeHard Drive
  • RPM7200 RPM
  • Cache256MB
  • Average Latency4.16ms
  • 8TB capacity supports massive bulk-data workloads
  • 7200 RPM spindle speed delivers high-throughput performance
  • 256MB cache accelerates frequent data access
  • SAS 12Gb/s interface enables fast enterprise connectivity
  • 550TB yearly workload rating sustains 24×7 operation

Enterprise 8TB SAS drive

The Seagate Exos 7E10 ST8000NM018B is an 8TB 3.5-inch internal hard drive built for enterprise bulk-data workloads. It spins at 7200 RPM with a 256MB cache and connects via a SAS 12Gb/s interface. The drive is rated for 550TB of data written per year and a 2 million hour MTBF.

Suited for 24x7 arrays, not desktop PCs

This drive targets data-centre architects and IT teams running replicated or RAID storage that operates around the clock. It is not intended for single-drive desktop use, gaming rigs, or systems that lack a SAS controller and backplane.

Verify SAS controller and bay clearance

Confirm your host bus adapter or RAID card supports SAS 12Gb/s and the 512e/4Kn sector format. Ensure the 3.5-inch bay accommodates the 26.11mm height, 101.85mm width and 147.00mm length. Check that your firmware and cabling match the SAS specification.

Öne çıkanlar

  • 8TB capacity supports massive bulk-data workloads
  • 7200 RPM spindle speed delivers high-throughput performance
  • 256MB cache accelerates frequent data access
  • SAS 12Gb/s interface enables fast enterprise connectivity
  • 550TB yearly workload rating sustains 24×7 operation

Teknik özellikler

BrandSeagate
SeriesExos 7E10
ModelST8000NM018B
InterfaceSAS 12Gb/s
Capacity8TB
NAND Flash Memory TypeHard Drive
RPM7200 RPM
Cache256MB
Average Latency4.16ms
FeaturesEnterprise Drive for Bulk Data Applications
Robust Bulk Data Storage for a 24x7 World
High Performance for Mainstream Data Centre Applications
Enhanced Reliability, Data Protection, and Security
Best-Fit Applications:
Hyperscale applications/cloud data centres
Massive scale-out data centres
OLTP and HPC applications
High-capacity density RAID storage
Mainstream enterprise external storage arrays
Distributed file systems, including Hadoop and Ceph
Enterprise backup and restore - D2D, virtual tape
Centralised surveillance
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.11mm
Width (maximum)101.85mm
Length (maximum)147.00mm
Kargo ağırlığı0.91 kg
Koli boyutu196 × 152 × 51 mm

Bu ürünle ilgili sorular

What controller or backplane do I need to connect the SAS 12Gb/s interface on this ST8000NM018B?

You need a SAS 12Gb/s HBA, RAID controller or backplane with compatible SAS ports and cables.

Will the 512e/4KN sector format on this 8TB drive work with my older RAID controller that only supports 512n?

The drive uses 512e/4KN formatting; compatibility depends on whether your controller explicitly supports 512e or 4KN logical sectors.

How can I confirm the 7200 RPM spindle speed and 256MB cache are active after installation?

Check the drive's reported RPM and cache size in your OS disk utility or controller BIOS; they should show 7200 RPM and 256MB.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.