Seagate
Seagate Exos X20 ST20000NM007DProduct 20TB 7200 RPM SATA 6.0Gb/s 256MB 3.5" internal hard drive
A 20 TB enterprise hard drive with 7200 RPM, 256 MB cache and SATA 6.0 Gb/s interface for high-capacity storage systems
- InterfaceSATA 6.0Gb/s
- Capacity20TB
- Flash Memory CapacityHard Drive
- NAND Flash Memory TypeSLC
- Recording TechnologyCMR
- RPM7200 RPM
Options 20TB Exos X20
- 20TB Exos X20
- 16TB Exos X16
- 10TB Exos X16
- 20TB capacity stores massive datasets in a single 3.5" drive
- 7200 RPM spindle speed delivers fast sequential throughput for heavy workloads
- 256MB cache buffers bursts to sustain consistent performance
- 5M-hour MTBF rating supports continuous operation in enterprise arrays
- SATA 6.0Gb/s interface integrates directly into existing storage infrastructure
Capacity and interface
The Seagate Exos X20 ST20000NM007D is a 20TB 3.5-inch internal hard drive with a SATA 6.0Gb/s interface and 7200 RPM spindle speed. It uses conventional magnetic recording and a 256MB cache to deliver high sequential throughput for enterprise storage arrays and hyperscale applications. The 512e/4Kn format supports modern operating systems and legacy controllers alike.
System compatibility
Verify that your host has a free 3.5-inch drive bay and a SATA 6.0Gb/s port capable of 600 MB/s transfer rates. The drive measures 147mm long, 101.85mm wide and 26.10mm high, so confirm physical clearance in compact chassis. A SATA power connector is required; the unit is hot-pluggable for supported backplanes.
Upgrade path
This model replaces lower-capacity 3.5-inch enterprise drives where rack density and cost per terabyte are primary concerns. The jump is worthwhile when workloads demand 2.5M-hour MTBF reliability, sustained random performance of 168000 read and 550000 write IOPS, and the lowest total cost of ownership for massive scale-out deployments.
Öne çıkanlar
- 20TB capacity stores massive datasets in a single 3.5" drive
- 7200 RPM spindle speed delivers fast sequential throughput for heavy workloads
- 256MB cache buffers bursts to sustain consistent performance
- 5M-hour MTBF rating supports continuous operation in enterprise arrays
- SATA 6.0Gb/s interface integrates directly into existing storage infrastructure
Teknik özellikler
| Brand | Seagate |
|---|---|
| Series | X20 |
| Model | ST20000NM007D |
| Interface | SATA 6.0Gb/s |
| Capacity | 20TB |
| Flash Memory Capacity | Hard Drive |
| NAND Flash Memory Type | SLC |
| Recording Technology | CMR |
| RPM | 7200 RPM |
| Cache | 256MB |
| Average Latency | 4.16 ms |
| Features | Market-leading 20TB HDD offering the highest capacity available for more petabytes per rack* Highly reliable performance with enhanced caching, making it the logical choice for cloud data center and massive scale-out data center applications Hyperscale SATA model tuned for large data transfers and low latency PowerBalance feature optimizes Watts/TB Maximize total cost of ownership savings through lower power and weight with helium sealed-drive design Proven helium side-sealing weld technology for added handling robustness and leak protection Digital environmental sensors to monitor i |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| Height (maximum) | 26.10mm |
| Width (maximum) | 101.85mm |
| Length (maximum) | 147mm |
Bu modelin diğer sürümleri
Aynı seriden 2 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
Seagate Exos X16 ST16000NM001G 16TB 7200 RPM SATA 6.0Gb/s 256MB 3.5" internal hard drive
- Bare Drive
- 16TB
Bu ürünle ilgili sorular
Does the Seagate Exos X20 ST20000NM007D include mounting screws or a SATA cable, or must they be purchased separately?
The drive is supplied as a bare 3.5" unit; mounting screws and a SATA data cable are not included and must be sourced separately.
Should I choose the 512e or 4Kn disk format for a modern server running a recent Linux kernel?
The drive supports both 512e and 4Kn; 4Kn is preferred on modern Linux kernels for full 4 KB sector efficiency, while 512e maintains compatibility with older systems.
What sustained throughput can I expect from the 7200 RPM SATA 6.0Gb/s interface once the drive is installed in a RAID array?
The SATA 6.0Gb/s link caps at 600 MB/s; real-world sustained transfer rates will be lower and depend on workload, but the interface itself does not exceed 600 MB/s.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Acumen Disc H11-SATA150 1-to-11 SATA Duplicator 150MB/s
- Hard Drive Duplicat…
- 1 to 11
VinPower HDDMINIDUP-3 1 to 3 SATA 2.5" 3.5" Duplicator
- 1 to 3
- 90MB/s





