BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00278355BTC
Stokta
SK hynix
SK hynix HMA41GU6AFR8N-TF 16GB (2x8GB) DDR4-2133 CL15 desktop RAM
A 16 GB dual-channel DDR4 kit running at 2133 MT/s with CL15 latency and 1.20 V operation
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCNo
- Buffered/RegisteredUnbuffered
- 16 GB total capacity in a dual-channel 2×8 GB kit
- DDR4-2133 speed rated at PC4-17000 for responsive performance
- CL15 CAS latency keeps access times tight
- 20 V operation reduces power draw and heat
- 288-pin unbuffered DIMMs install in standard desktop slots
Kit composition
This kit contains two 8 GB DIMMs for a total of 16 GB of DDR4 desktop memory. It is aimed at builders who need a straightforward capacity upgrade for everyday computing tasks. The modules are unbuffered and non-ECC, matching standard consumer motherboard slots.
Sustained operation
Rated at DDR4-2133 with a CAS latency of 15, the modules run at 1.20 V under continuous load. The PC4-17000 bandwidth rating reflects steady-state throughput rather than a short burst figure. No heat spreader is mentioned, so thermal behaviour depends on case airflow alone.
Installation notes
Each stick uses the 288-pin DIMM form factor and seats in a regular DDR4 slot. Because the kit is unbuffered and non-ECC, it will not work in platforms that require registered or error-correcting memory. Buyers who need ECC support or registered DIMMs should look elsewhere.
Öne çıkanlar
- 16 GB total capacity in a dual-channel 2×8 GB kit
- DDR4-2133 speed rated at PC4-17000 for responsive performance
- CL15 CAS latency keeps access times tight
- 20 V operation reduces power draw and heat
- 288-pin unbuffered DIMMs install in standard desktop slots
Teknik özellikler
| Brand | Hynix |
|---|---|
| Series | Desktop Memory |
| Model | HMA41GU6AFR8N-TF |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Bu ürünle ilgili sorular
How much heat does the 1.20V DDR4 kit produce when running all day?
The modules operate at the standard DDR4 voltage of 1.20V, so heat output stays low during continuous use. No active cooling is required in a normally ventilated case.
What must my motherboard provide for these 288-pin DIMMs to work?
Your board needs two free DDR4 DIMM slots that support 2133 MT/s unbuffered non-ECC memory. The kit installs directly with no extra cables or drivers.
Will the CL15 timing work with older DDR4 sticks I already have?
The motherboard will run all installed modules at the slowest common speed and highest latency. Mixing CL15 with slower sticks is functional but reduces overall bandwidth.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
