Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Square black 60mm case fan with transparent blades and three-wire connector

SXDOOL

SXDOOL EVERFLOW B126015BU 6015 6cm case fan 12V .40A 6200RPM 38DBA

SKU CH-Z0EN-CMAX2

A 60 mm double-ball-bearing case fan spins at 6200 RPM with 38 dBA noise on 12 V 0.40 A power

  • High airflow from 6200 RPM motor
  • Quiet operation at 38 DBA noise level
  • Long life with double ball bearing
  • Standard 60 mm square fits tight builds
  • 12 V 0.40 A draws little power

SXDOOL EVERFLOW B126015BU 6cm case fan

The SXDOOL EVERFLOW B126015BU is a 60 mm square frame fan measuring 15 mm thick. It runs on 12 V power and draws 0.40 A through a three-wire connection. Double ball bearings support the 6200 RPM operating speed.

Suits compact builds; not for silent

This fan fits small-form-factor cases and tight CPU or AIO cooler mounts where a 6015-size unit is required. The 38 dBA noise level at full speed makes it less suitable for noise-sensitive environments. Builders needing higher airflow at lower noise should look at larger frame sizes.

Double ball bearing at 6200 RPM

The double ball bearing construction is the specification that determines long-term reliability at the rated 6200 RPM. It resists wear better than sleeve alternatives in continuous operation. Verify that your header supplies 12 V and can deliver the 0.40 A current before installing.

Öne çıkanlar

  • High airflow from 6200 RPM motor
  • Quiet operation at 38 DBA noise level
  • Long life with double ball bearing
  • Standard 60 mm square fits tight builds
  • 12 V 0.40 A draws little power

Teknik özellikler

Bu ürün için henüz yayınlanmış teknik özellik yok.

Bu ürünle ilgili sorular

How do I install the 6015 fan and which step is commonly missed?

Mount the 60 mm frame with four screws, connect the three-wire 12 V header, and verify the tachometer signal appears in BIOS — the third wire is often left unplugged.

What maintenance will the double ball bearing need later?

The double ball bearing is sealed and rated for continuous 6200 RPM operation; no re-lubrication is required, but expect eventual replacement when noise rises above 38 DBA.

What limit appears first during sustained 6200 RPM use?

At 0.40 A draw the 12 V header’s current rating is reached before thermal throttling, so the motherboard connector becomes the limiting factor.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.